Search found 5 matches

by jjsohio
Fri Jun 05, 2015 12:59 pm
Forum: GL1500 Information & Questions
Topic: 96 GL1500i Air shock
Replies: 10
Views: 448

Re: 96 GL1500i Air shock

Sorry for the confusion. As I was reading the replies, it looked like the conversation steered off in a different direction. I think I have found what I need to do the rebuild by looking at the parts from a 90. Add the various videos on youtube and the posts on this site, I think I can handle this. ...
by jjsohio
Sat May 30, 2015 8:13 am
Forum: GL1500 DIY Articles
Topic: Lifting the Bags to access rear wheel
Replies: 15
Views: 8616

Re: Lifting the Bags to access rear wheel

The video is no longer available. Anybody know if there is a similar one around?
Getting ready to work on the rear shock and this sure seems like a better way then removing everything.
by jjsohio
Wed May 13, 2015 1:59 pm
Forum: GL1500 Information & Questions
Topic: 96 GL1500i Air shock
Replies: 10
Views: 448

Re: 96 GL1500i Air shock

The ride and feel are not different then what it has been since I got this bike. So while its entirely possible the seals are blown, I don't think I did that. That said, I cant seem to find any information on a rebuild kit for this. Is anybody able to point me in the right direction? All the 'replac...
by jjsohio
Mon May 11, 2015 2:44 pm
Forum: GL1500 Information & Questions
Topic: 96 GL1500i Air shock
Replies: 10
Views: 448

96 GL1500i Air shock

Over the weekend I stopped at the local tire place and added air to tires. Figured it was a good time to also check the rear shock psi. Put my pressure gauge onto the fitting and get blasted by a spray of oil... when the oil spray stopped, I have no pressure reading (gauge does work). I then proceed...
by jjsohio
Mon May 19, 2014 1:31 pm
Forum: GL1500 Information & Questions
Topic: 96 GL1500i clutch master cylinder noise
Replies: 1
Views: 132

96 GL1500i clutch master cylinder noise

recently flushed clutch and brake fluids. shortly after this, the clutch lever makes a 'squeaking' sound when activated. checked the bushing and it is ok. It looks like the rubber piece inside the master cylinder is not collapsing into itself, rather folding to the side. (part plunger makes contact ...