Search found 7 matches

by drummerdave9
Tue Apr 18, 2017 10:42 pm
Forum: GL1100 DIY Articles
Topic: Fork Seal Repacement
Replies: 91
Views: 35827

Re: Fork Seal Repacement

Thanks. All reassembled and rides great.
by drummerdave9
Sat Apr 15, 2017 11:23 am
Forum: GL1100 DIY Articles
Topic: Fork Seal Repacement
Replies: 91
Views: 35827

Re: Fork Seal Repacement

Thanks for the info. It saved me some $. However while doing new seals I installed a set of progressive Springs in the front and now I am topping out which hads blown my fog light bulbs. According to the instructions it describes stock spacers and chamging the height. Not sure what they are talking ...
by drummerdave9
Mon Mar 28, 2016 6:05 am
Forum: GL1100 Information & Questions
Topic: suspension
Replies: 5
Views: 193

Re: suspension

The oil came out of the airline connection. So I guess I lost some oil as opposed to leak oil. I was afraid I would still need to rebuild them. Can you recommend any good tutorials for rebuilding them? Thanks for the info
by drummerdave9
Sun Mar 27, 2016 5:03 pm
Forum: GL1100 Information & Questions
Topic: FRONT SUSPENSION AIR LEAK
Replies: 12
Views: 434

Re: FRONT SUSPENSION AIR LEAK

I did however replace my front and rear because they were leaking and did not want to tackle new seals. I found a "decent" set of front and back shocks on eBay. After install front shocks are topping out and rear is still bottoming out. I have plenty of air in both. I am not a mechanic and tried to ...
by drummerdave9
Sun Mar 27, 2016 4:44 pm
Forum: GL1100 Information & Questions
Topic: suspension
Replies: 5
Views: 193

suspension

I had a blown seal on the front and a leaky shock in the rear. I replaced both sets with used sets off ebay, shady I know. Anyway after installation and pumping them up my rear is bottoming out and my front is topping out. Not sure what to do about it, or if I missed a step during install. Any help ...
by drummerdave9
Wed Jan 13, 2016 2:54 pm
Forum: GL1100 Information & Questions
Topic: exhaust baffle removal?
Replies: 13
Views: 3477

Re: exhaust baffle removal?

I'm considering the header pipe and slip on solution as my best option. Is there a way to do it and keep the center stand? My pipes are grooved for the center stand and any other pipes are not. Has anyone else left the center stand on? Thanks for the info.
by drummerdave9
Sun Jan 10, 2016 3:43 pm
Forum: GL1100 Information & Questions
Topic: exhaust baffle removal?
Replies: 13
Views: 3477

Re: exhaust baffle removal?

wingadmin is there a set of pipes you would recommend? I am interested in getting a little more growl out of my Goldwing. I have just started to look into what it is going to take and like your suggestion. Currently the bike is stripped down getting ready to get a new paint job. While I have it torn...