Search found 40 matches

by mikeg1906
Sun May 17, 2015 7:31 am
Forum: GL1200 Information & Questions
Topic: Having a clutch issue on a 1984 GL1200
Replies: 6
Views: 499

Re: Having a clutch issue on a 1984 GL1200

Replace your clutch hose from the clutch handle to clutch slave on back of motor. I had same problem with mine 1984 and for 3 years I replaced everything but the hose. And it was somewhat better but when it got hot there be very little clutch to no clutch. I Bought line on e-bay stainless line 1 pcs...
by mikeg1906
Sat Jun 18, 2011 11:29 pm
Forum: GL1200 Information & Questions
Topic: NEED info on GL1200 rear wheels
Replies: 1
Views: 318

NEED info on GL1200 rear wheels

:? could some one tell me how to tell a 1984 wheel from 85,86,87. My right bearing is not flush with hub. my right bearing in set in 1/4 of inch. I have 2 other wheels here and was told they are 1985. But one right bearing is flush with hub and other one is in 1/4 inch. but i been told there are 198...
by mikeg1906
Fri Jun 17, 2011 10:48 pm
Forum: GL1200 Information & Questions
Topic: 1984 GL1200I rear wheel help PLEASE
Replies: 6
Views: 412

Re: 1984 GL1200I rear wheel help PLEASE

could some one tell me how to tell a 1984 wheel from 85,86,87. My right bearing is not flush with hub. my right bearing in set in 1/4 of inch. I have 2 other wheels here and was told they are 1985. But one right bearing is flush with hub and other one is in 1/4 inch. but i been told there are 1985. ...
by mikeg1906
Fri Jun 17, 2011 9:50 pm
Forum: GL1200 Information & Questions
Topic: 1984 GL1200I rear wheel help PLEASE
Replies: 6
Views: 412

Re: 1984 GL1200I rear wheel help PLEASE

Hello everyone. I am still having problem with rear wheel. If I tighten rear axle nut wheel turn hard. it is not the brakes 100% sure. I took wheel off again and took it to Honda and they put in new OEM bearings in again and I took axle and both AXLE COLLARs and spacer that goes in and showed him ho...
by mikeg1906
Sun Jun 05, 2011 7:26 pm
Forum: GL1200 Information & Questions
Topic: 1984 GL1200I rear wheel help PLEASE
Replies: 6
Views: 412

Re: 1984 GL1200I rear wheel help PLEASE

yes my tire pressure correct I run 41 in front and 42 in rear. But no I didn't check axle for warped. other then when on bike on center stand I put it in gear and look at wheel. I do see aliitle different in gap at one point of tire going around. you might be on to something.
by mikeg1906
Sun Jun 05, 2011 7:12 pm
Forum: GL1200 Information & Questions
Topic: 1984 GL1200I rear wheel help PLEASE
Replies: 6
Views: 412

Re: 1984 GL1200I rear wheel help PLEASE

Hello, No it was not the spacer between the bearings it was the one that goes on either side of the brake bracket. One AXLE COLLAR goes in wheel seal then brake bracket then other AXLE COLLAR. I just not 100% sure the 2 AXLE COLLAR are the exact something. It is hard to see in parts book. And I thou...
by mikeg1906
Sun Jun 05, 2011 6:40 pm
Forum: GL1200 Information & Questions
Topic: 1984 GL1200I rear wheel help PLEASE
Replies: 6
Views: 412

1984 GL1200I rear wheel help PLEASE

Hello everyone I need some help on my 1984 Gl1200I I went and replaced the rear bearing with OEM Honda bearings. But know after riding 25 miles or so my rear wheel is a lot hotter then my friend 1984 Gl1200A. I would say 60 deg or more. I can put my hand on his wheel and it is warm but mine is hot a...
by mikeg1906
Sun Apr 24, 2011 4:54 pm
Forum: GL1200 Information & Questions
Topic: Having a clutch issue on a 1984 GL1200
Replies: 6
Views: 499

Re: Having a clutch issue on a 1984 GL1200

I will have to try that. With the weather we are have cold and warm and raining. That just might be the problem. Thanks :)
by mikeg1906
Sat Apr 23, 2011 8:53 pm
Forum: GL1200 Information & Questions
Topic: Having a clutch issue on a 1984 GL1200
Replies: 6
Views: 499

Having a clutch issue on a 1984 GL1200

Hello everyone Hope you are having nicer weather then me in northwest PA. It has been cold and wet around here. But it did get nice today. I went out for a ride and my clutch was fine when left. But after about 30 miles I notice there was very little clutch then after a few more miles there was no c...
by mikeg1906
Sun Apr 03, 2011 5:20 pm
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: Need info on best after market CB/INTERCOM for GL-1200I

Hello I just put some pic on of my J&M on bike. It works very good from what I used it so far. There is a little hum you can hear. if you turn up radio a little you can not hear it that much. I read on hear others are having same hum. :)
by mikeg1906
Fri Apr 01, 2011 5:37 pm
Forum: Goldwing Chat
Topic: Wireless Motorcycle Tire Pressure Monitor System
Replies: 13
Views: 844

Re: Wireless Motorcycle Tire Pressure Monitor System

I looked at the two you said Kisan and the Doran systems. Which looks to be ok. a little pricely. But I think it would be better the having something hooked on a valve stem. Thank you for the info. :)
by mikeg1906
Thu Mar 31, 2011 3:42 pm
Forum: Goldwing Chat
Topic: Wireless Motorcycle Tire Pressure Monitor System
Replies: 13
Views: 844

Re: Wireless Motorcycle Tire Pressure Monitor System

mikeg1906 wrote:
tmilam wrote:I can squat for FREE and use my $1.00 gauge. Just saying!
Ya but that would get my knees dirty...LOL
by mikeg1906
Wed Mar 30, 2011 9:01 pm
Forum: GL1200 Information & Questions
Topic: who have replace or know howto pull starter on a 1984 GL1200
Replies: 14
Views: 418

Re: who have replace or know howto pull starter on a 1984 GL

when I did my 84 gl1200 which I pulled out 3 or 4 time after the frist time it was easy. But some will say must be on side stand. But I did my on center stand and the spline was not a problem for me. after I got the one stud out of header pipe. Then you can put some greese on tip and a little oil al...
by mikeg1906
Wed Mar 30, 2011 7:58 pm
Forum: Goldwing Chat
Topic: Magic Rust Remover
Replies: 8
Views: 286

Re: Magic Rust Remover

I can't say I heard of that but will try it out. Thanks for the info.
by mikeg1906
Wed Mar 30, 2011 7:54 pm
Forum: Goldwing Chat
Topic: Wireless Motorcycle Tire Pressure Monitor System
Replies: 13
Views: 844

Re: Wireless Motorcycle Tire Pressure Monitor System

tmilam wrote:I can squat for FREE and use my $1.00 gauge. Just saying!
Ya but that would bet my knees dirty...LOL
by mikeg1906
Wed Mar 30, 2011 7:50 pm
Forum: Goldwing Chat
Topic: Wireless Motorcycle Tire Pressure Monitor System
Replies: 13
Views: 844

Re: Wireless Motorcycle Tire Pressure Monitor System

Ya I can see the extra weight on valve stems might be a problem. but for the blancing you can put them on when you get tirer put on and blance them with them on already.
by mikeg1906
Sun Mar 27, 2011 12:15 pm
Forum: Goldwing Chat
Topic: Wireless Motorcycle Tire Pressure Monitor System
Replies: 13
Views: 844

Wireless Motorcycle Tire Pressure Monitor System

Hello, Everyone

Does anyone have info for the best Wireless Motorcycle Tire Pressure Monitor System for a bike? :D Like to get one but not sure what’s the best one out there. Any input would be great. Thank you all very much
by mikeg1906
Wed Mar 23, 2011 6:42 pm
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: Need info on best after market CB/INTERCOM for GL-1200I

hello, Sierra Electronics is the only place I know that has parts for those radio. They do good work from what i have heared or read on the net. I have not had them do anything for me. But from what I heard they are not cheap. You can try and get one on E-bay but they go for 200.00+ most of the time...
by mikeg1906
Wed Mar 23, 2011 5:11 pm
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: Need info on best after market CB/INTERCOM for GL-1200I

Hello all Well I got the new system up and running: This is what I installed. J&M-JCB03HBK01P: J&M H.Bar Mount Bracket for JMCB2003DU, SL 1 $35.14 J&M-CB2003BDU: J&M BMW OR Universal CB System w/Intercom Fits Any Bike 1 $300.79 J&M-HS-ICD277-KTC Helmet Headset 2 $149.99/ea System works good so far B...
by mikeg1906
Fri Mar 18, 2011 9:15 pm
Forum: GL1100 Information & Questions
Topic: STARTER REMOVAL HELP
Replies: 4
Views: 226

Re: STARTER REMOVAL HELP

Hello,
You need to remove the one stud. That will give you what you need to get it out. Try spaying it with blaster and let sit over night. And then try it again. Hope this helps :)
by mikeg1906
Fri Mar 18, 2011 8:27 pm
Forum: Goldwing Chat
Topic: First ride of the year
Replies: 18
Views: 217

Re: First ride of the year

Hi, all
I took about a 80 mile ride yesterday for 1st time this year also. it was very nice day. Most all the snow is gone. Boy it is about time I did not think winter was ever going to get over this year. Bad part it just might still snow again this year. :(
by mikeg1906
Fri Mar 18, 2011 8:15 pm
Forum: Goldwing Chat
Topic: radio install
Replies: 1
Views: 254

Re: radio install

hello,
You can buy a HONDA GL1200 GOLDWING RADIO BEZEL GL 1200 on Ebay for $49.95
this is E-bay number of one 150574185339. Then you can put in any reg car radio you want. Hope this help you. You can also find speakers on e-bay for it to. :)
by mikeg1906
Fri Mar 18, 2011 7:06 am
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: info on best after market CB/INTERCOM for GL-1200I

ok I found it on ebay. But u need to pay for shipping which is 12.00. that is the lowest I can find if you not a member of wingstuff.com there is $300.79 with free shipping. :)
by mikeg1906
Fri Mar 18, 2011 6:53 am
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: info on best after market CB/INTERCOM for GL-1200I

send me the item #. I have looked on there the only one I found at that price is the driver only set. :)
by mikeg1906
Thu Mar 17, 2011 9:37 pm
Forum: GL1200 Information & Questions
Topic: Need info on best after market CB/INTERCOM for GL-1200I
Replies: 36
Views: 1075

Re: info on best after market CB/INTERCOM for GL-1200I

$1,000.00 ?? Yikes!! That's a lot of money for a retiree on a pension. I'm just hoping my old '86 Aspy 1200 will still do the job this summer. I even went to Goodwill and bought some more cassette tapes to play. Now there's positive thinking!! Well I could spend 5000+ for a gl1500 or more for a 180...