I-COM button stuck in on position.


Anything goes - doesn't fit any other category!
  • Sponsored Links
Jholmes
Posts: 2
Joined: Sun Jul 01, 2012 5:33 pm
Location: Springfield, Missouri
Motorcycle: 2002 GL1800

I-COM button stuck in on position.

Postby Jholmes » Wed Aug 22, 2012 3:26 pm



Anyone have a solution?



User avatar
themainviking
Posts: 2581
Joined: Wed Sep 29, 2010 6:59 pm
Location: North Bay, Ontario, Canada
Motorcycle: 2009 GL1800 AD

Re: I-COM button stuck in on position.

Postby themainviking » Wed Aug 22, 2012 7:21 pm

Sorry, I have to ask the silly question. Did you press it and hold it in until it beeped to turn it off? If so, then is the button actually stuck in? If this is the case, then you will need to wiggle it and woggle it till it frees up and then press it in and hold it in until it beeps. Then it will be turned off. Then you will need to clean the switch and button until it operates freely again.

Hope this helps. If not, come back and someone else will try to help.
It ain't about the destination - it's all about the journey

ImageImage

User avatar
seabee_
Posts: 494
Joined: Sun May 29, 2011 8:17 pm
Location: sterling heights, mi
Motorcycle: 1985 Honda Goldwing GL1200
117k miles
1977 Kawasaki kz400
1978 Suzuki GSXr750
1980 Kawasaki GPZ400
1975 Honda CB360T

Re: I-COM button stuck in on position.

Postby seabee_ » Wed Aug 22, 2012 8:27 pm

If you're talking about the handlebar switch spray wd40 into the switch and give it time to dissolve any crud inside. Then you might need to push it to work it. When it starts working good spray some contact cleaner in it. Doing this every now and then is good preventive maintenance.
Paul
CE1 Navy Seabees/RET
1981 to 2002
ASE Mechanic

Jholmes
Posts: 2
Joined: Sun Jul 01, 2012 5:33 pm
Location: Springfield, Missouri
Motorcycle: 2002 GL1800

Re: I-COM button stuck in on position.

Postby Jholmes » Tue Aug 28, 2012 9:04 pm

Thanks for the help. I used contact cleaner and the I-Com button is working fine.




Return to “Goldwing Chat”




Who is online

Users browsing this forum: alwims, wingpilot08 and 4 guests