2006 GL 1800


Anything goes - doesn't fit any other category!
  • Sponsored Links
User avatar
russ85228
Posts: 17
Joined: Fri Apr 23, 2010 5:25 pm
Location: Coolidge,AZ
Motorcycle: 2006 GL1800
1981 GL1100 Aspencade

2006 GL 1800

Postby russ85228 » Tue Jun 01, 2010 5:26 pm



Getting ready to change my oil and plugs, clean breather tube, anything special I should know about procedure that will make things easier?



User avatar
FlyBoy2121
Posts: 302
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: 2006 GL 1800

Postby FlyBoy2121 » Tue Jun 01, 2010 6:11 pm

I Russ 85288

For a better oil change and the oil is draining well, the engine must be hot.

And for the spark plug with hot engine, Thread does not break, aluminium engine.

FlyBoy2121

User avatar
russ85228
Posts: 17
Joined: Fri Apr 23, 2010 5:25 pm
Location: Coolidge,AZ
Motorcycle: 2006 GL1800
1981 GL1100 Aspencade

Re: 2006 GL 1800

Postby russ85228 » Tue Jun 01, 2010 6:21 pm

what do you mean that the thread doesn't break with a hot engine... On the plug or the motor?

User avatar
FlyBoy2121
Posts: 302
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: 2006 GL 1800

Postby FlyBoy2121 » Tue Jun 01, 2010 9:14 pm

I Russ 85288 !!!

It's always better hot engine for change the spark, aluminum expend much,when aluminum is cold, tighten the spark its steel spark plug you screw.
If you do not understand I will ask my brother in la he is English. It's better now that I just explain

Excuse my English I'm not good.

FlyBoy2121 :)

User avatar
russ85228
Posts: 17
Joined: Fri Apr 23, 2010 5:25 pm
Location: Coolidge,AZ
Motorcycle: 2006 GL1800
1981 GL1100 Aspencade

Re: 2006 GL 1800

Postby russ85228 » Wed Jun 02, 2010 7:53 pm

I understand now. Thank you! It's better to do the plug when engine is hot due to expansion and contraction of aluminum engine block..

User avatar
FlyBoy2121
Posts: 302
Joined: Thu Sep 10, 2009 3:28 pm
Location: Canada
Motorcycle: Honda GoldWing
Gl 1800 2003

Re: 2006 GL 1800

Postby FlyBoy2121 » Wed Jun 02, 2010 8:38 pm

I Russ 85228 !!!!!

I'm glad you understood my explanation.

I am 60 years old and over, it is very difficult for me to study English.

I did my best to help those who ask questions

Take your time and doing a good job.

Nex time !!!!!!!

FlyBoy2121 Québec Canada

User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 2006 GL 1800

Postby WingAdmin » Wed Jun 02, 2010 9:10 pm

Your English is far better than my francais! Je ne comprends pas beaucoup le francais.




Return to “Goldwing Chat”




Who is online

Users browsing this forum: seelyark1, wingpilot08 and 3 guests