Original Goldwing prototype

Anything goes - doesn't fit any other category!
  • Sponsored Links
Post Reply
User avatar
Site Admin
Posts: 19069
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Original Goldwing prototype

Post by WingAdmin » Sun Feb 28, 2016 7:47 pm

Anyone ever see a picture of the original Goldwing prototype, from 1972? The M1 was in fact closer to the GL1500, with six cylinders and 1470cc, than it was to the GL1000. It was designed to produce tons of torque, and a top speed of 140 mph.

From Honda itself:

It was to be the King of Motorcycles. It would set new standards of smoothness, comfort, speed and quality. It led to the creation of the greatest touring-motorcycle dynasty ever. Its influence continues to be felt to this day. And it was never meant to be seen outside of Honda R&D.

The project was known only by its code: M1. Created some 42 years ago as an outrageous experiment to push the boundaries of what was then possible in motorcycle design, the liquid-cooled, six-cylinder, shaft-drive prototype was an internal exercise, the answer to a question that has inspired some of Honda’s greatest designs: What if?

To understand the M1’s significance, you have to understand motorcycling’s landscape in the early ’70s, and Honda’s philosophy. Then, multi-cylinder motorcycle engines were still a rarity, with Honda’s CB750 the exception to the rule. Plus, the prevailing orthodoxy of the day made air-cooling and chain drive almost universal for motorcycles. In addition, Soichiro Honda always pushed for creation first, then the process of reconsidering and revising. This way of thinking encouraged engineers to push the limits of possibility, without the limitations of practical application. Honda also had a policy of rotating engineers between motorcycle and automotive design departments. Not that they were separate; back then, all of Honda’s engineers worked in the same large room. As a result, there was a vast cross-pollination of ideas and concepts. The M1’s project leader was Shoichiro Irimajiri, who had led the design of Honda’s classic five- and six-cylinder Grand Prix engines of the ’60s, and then gone on to assist Honda’s transition to car manufacturing. With that background, the M1’s creation, and its use of both Grand Prix racing and automotive features, seem logical, even inevitable.

The M1 was a leap of faith, and it delivered Honda into new areas. Although it sprang from the limitless ambition to make a flagship, engineers at first had no idea what form it would take. And that was the point behind the M1, to explore possibility. What’s more, as the exploration went on, it split the engineers on the M1’s basic direction, whether it was to be a Grand Touring machine or an ultra-high-performance bike. In the end, the GT direction won out, with an engine designed for a broad powerband and flat torque curve, not the highest peak power. At a time when every other manufacturer pursued peak performance as the key to sales, the M1’s broad-power approach was a bold new direction.

While it was never originally intended as a prototype for the Gold Wing®, it’s easy to see how the M1 influenced the creation of the original Gold Wing. The six-cylinder M1 was an example of blue-sky thinking at its best, but the Gold Wing had to be mass-produced, marketed and sold. The sheer size and complexity of the M1’s six-cylinder engine made production impractical at the time, but the opposed cylinder configuration was carried into the original four-cylinder GL1000.

The M1’s influence far exceeded what the original design team envisioned. In fact, when Honda engineers began developing the current six-cylinder Gold Wing GL1500 introduced in 1988, engineers spooned the M1’s six-cylinder engine into a GL1200 chassis to evaluate the merits of a six- versus a four-cylinder. That engine, almost 20 years old at the time, became Honda’s oldest test mule.

Today, the M1 is still around at Honda R&D. It now wears a complete front end from a GL1100, replacing the CB750 front end it originally wore. The rest of it’s the same, though, from the bread-loaf-like gas tank, to the black, slab-sided rocker covers and the car-like distributor poking up from the left bank of cylinders. Look at it now and you can see back to the future of motorcycling.

The M1 helped pave the way for the current generation of motorcycles, where low maintenance, high torque, and smooth, quiet running remain marketable design characteristics. These common traits were once a radical idea that came together in a small R&D facility in Japan, in a motorcycle called the M1.

Goldwing M1 Prototype
Goldwing M1 Prototype

It still exists (possessed by Honda R&D) today
It still exists (possessed by Honda R&D) today

User avatar
Posts: 1653
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD (X2), 2008 GL1800 (sold)

Re: Original Goldwing prototype

Post by Rednaxs60 » Mon Feb 29, 2016 12:04 am

I thought that the 750s were a huge bike in the day, especially since my first bike was a Suzuki 250 Hustler in 1972. My father said I should look at the 750 Suzuki, but I felt it was too big - 2 months later wish I had the 750. To think that a 1470 cc could have hit the market and the impact it would have had on the bike community would have been astounding. We are seeing 2 litre and 2.3 litre (140 cu in) engines in bikes and that's bigger than some engines in the cars I've owned. It's interesting to think of the impact on the cruising/touring world and even HD if Honda had put the M1 into some form of production.

Thanks for posting the article. Cheers
"When you write the story of your life, don't let anyone else hold the pen"


User avatar
Posts: 233
Joined: Sat Feb 15, 2014 3:31 pm
Location: Sacramento, California
Motorcycle: 1982 Gl1100A Aspencade *sold
1989 GL1500 Aspencade

Re: Original Goldwing prototype

Post by urbanmadness » Mon Feb 29, 2016 3:54 pm

I'll have one please.... :)

get a 1200 or 1100 frame and shoe horn a 1500 cc... and build it as a standard? Yes Please....

User avatar
Posts: 372
Joined: Thu Nov 12, 2015 3:45 pm
Location: Indiana
Motorcycle: 1996 GL1500SE GoldWing
1983 GL650i SilverWing
1981 CB750C Custom
1981 CM400 (Newest Project)

Re: Original Goldwing prototype

Post by flogger » Mon Feb 29, 2016 4:53 pm

Nice info and nice pix... I love the old bikes and the history. Rebuilding my current 750 takes me back down memory lane and I too recall when that was a big bike. Cracks me up today when people talk of 750s as nice starter bikes!
1996 GL1500SE GoldWing
1983 GL650i SilverWing
1981 CB750C Custom
1981 CM400 (project)

Image Image Image Image

User avatar
Posts: 435
Joined: Sat Sep 22, 2012 2:10 pm
Location: Lake Hopatcong, New Jersey
Motorcycle: 99 Gl-1500 SE
76 GL-1000
77 Honda Trail 90

Re: Original Goldwing prototype

Post by offcenter » Tue Mar 01, 2016 6:46 pm

Take a good look at the original pic of the prototype.
Much of the rear half of the bike is BMW.
The mufflers and seat jump out at me. I should know
since I own one of those early Beemers.

George in Jersey.
99 Goldwing GL-1500 SE
76 Goldwing Gl-1000
77 Honda CT-90 "Trail 90"

Post Reply