Moly 60 paste


Anything goes - doesn't fit any other category!
  • Sponsored Links
browntuna5647
Posts: 3
Joined: Sun Aug 16, 2015 10:24 am
Location: Rayland,Ohio
Motorcycle: "1982 GL1100A Aspencade"

Moly 60 paste

Postby browntuna5647 » Sun Mar 27, 2016 9:08 am



I recently discovered that Moly 60 paste is no longer available from Honda. The rear splines are to be lubed with this item, and the substitutes such as the Moly 77 does not have the same temperature capacity as the Moly 60. In your breakdown of removing the rear wheel on an 82 Aspencade on your website, it suggests using the Moly 77 paste. Is this 77 going to be adequate? Any other ideas?



User avatar
Happytrails
Posts: 653
Joined: Wed Sep 04, 2013 6:13 pm
Location: Tarentum, Pennsylvania
Motorcycle: 1991 Goldwing 1500 SE

Re: Moly 60 paste

Postby Happytrails » Sun Mar 27, 2016 9:21 am

There are other moly pastes available that would be a good replacement for Moly 60.
1991 GL1500 SE Anniversary Edition
Sun Flare Gold Metallic
Vallant Brown Inset

User avatar
Rednaxs60
Posts: 726
Joined: Wed Nov 18, 2015 12:44 pm
Location: Victoria, British Columbia, Canada
Motorcycle: 1985 GL1200 LTD, 2008 GL1800

Re: Moly 60 paste

Postby Rednaxs60 » Sun Mar 27, 2016 9:41 am

I used the Moly 77 paste from my local honda dealer for the drive line. Cost was approximately $12.00 an ounce (tube was 2 ounces). Looked for an alternative and scoured the different forums.

Found a reference to Loctite LB8012 and researched it. Has an advertised moly content of 65% - the actual is not stated as it is proprietary. I found it to have good consistency, and was not as dry as the moly 77 from Honda. Cost to me was $6.00 per ounce.

Interesting about the Honda Moly 77 paste is that it is made by PolySi Technologies, 5108 Rex McLeod Dr, Sanford, NC. There is no mention on the tube as to the moly content except the title, or any other content.

Here are a couple of pictures of this product:
"When you write the story of your life, don't let anyone else hold the pen"

Ernest

User avatar
OldZX11Rider
Posts: 1132
Joined: Mon Nov 09, 2015 9:25 am
Location: Garfield, Arkansas
Motorcycle: 1994 Honda GL1500 Goldwing SE

Re: Moly 60 paste

Postby OldZX11Rider » Sun Mar 27, 2016 3:09 pm

I'm using the Loctite Moly. Found it on a Wal-Mart website but it comes from someplace in California, I think.
Try Zorro.com, I think that was it. Was about $28 to my front door.


For he is the minister of God to thee for good. But if thou do that which is evil, be afraid; for he beareth not the sword in vain:


Return to “Goldwing Chat”




Who is online

Users browsing this forum: No registered users and 1 guest