GL1200 Speed Sensor failures & repair

Step-by-step tutorials on how to maintain and fix your GL1200
  • Sponsored Links
Posts: 346
Joined: Fri Mar 13, 2015 7:23 am
Location: Independence, MO
Motorcycle: 1981 Honda Goldwing Interstate GL1100I
1985 Honda Goldwing Limited Edition gl1200

Re: GL1200 Speed Sensor failures & repair

Post by sportsfreaked » Mon Dec 25, 2017 3:19 pm

When you "pott" it putting it back together can you just use regular silicone to do that or does it have to be a certain kind? I have never done this before and was curious. I have read that you can just use regular silicone but better safe then sorry. I have it taken out and have de-potted it and I have removed the chip. Mine actually had a cage for lack of a better term to hold it in place. Can't that just be reused on the new one? I haven't received the new ones yet but hope to have them by the end of the week. Thanks again for the knowledge!

Thanks to all who answer and help. It is greatly appreciated!

User avatar
Posts: 92
Joined: Fri Jun 25, 2010 7:37 am
Location: Pierre, SD
Motorcycle: 1985 GL1200 Aspencade

Re: GL1200 Speed Sensor failures & repair

Post by SlowTyper » Wed Dec 27, 2017 12:28 am

I used regular silicone. I used it because it seemed like a good choice to me -- but I don't know enough about it to know if it was a good choice or not.

User avatar
Posts: 168
Joined: Thu Aug 22, 2013 9:26 pm
Location: Burlington, WI (Honey Lake)
Motorcycle: 1983 GL1100 Aspencade
1983 GL1100 Aspencade
1983 GL1100 Aspencade (parts bike)

Re: GL1200 Speed Sensor failures & repair

Post by jeffcosmo » Wed Mar 21, 2018 11:52 am

From what I see, this should work with the '83 Aspencade digital unit as well. Mine is now working, but I have two dead sensors that look identical to the '84 unit pictured. Thank you for the information.


Post Reply