Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Posts: 2
Joined: Wed Aug 19, 2009 11:51 am
Location: Vancouver B.C.
Motorcycle: 1982 Aspencade


Postby Spider007 » Wed Sep 01, 2010 11:20 am

Over the years I have seen MANY very old windshields on Goldwings that the shield looked like it had a bad sun burn where the outer layer was missing so I have for many years been repairing them with an old school knowledge, so time to pass it on. If your windshield is as I have said just get yourself a roll of regular masking tape one inch wide and stick it to the top of the shield left to right or right to left press it on tight then peel it off the coating that was on the shield will come off with the tape, repeat one strip at at time for the rest of the shield, when all done spray LEMON PLEDGE on the shield and polish it in with a clean cloth and you ate done. If you need to do the inside just repeat to it. Good luck all Ken

User avatar
Posts: 53
Joined: Sat Sep 05, 2009 10:23 am
Location: Inverness, Scotland
Motorcycle: GL1800

Re: Windshields

Postby gogs11uk » Mon Sep 13, 2010 11:52 am

Never spotted this post till now for some reason. My 1500 screen was getting a bit shaky whn i sold the bike so I'll keep this in mind if neede for the 18. Thanks for the info


Return to “Tech Talk”

Who is online

Users browsing this forum: No registered users and 1 guest