Parasitic Draw Testing - New To Me


Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Post Reply
User avatar
Bluewaterhooker0
Posts: 817
Joined: Wed Nov 14, 2012 11:27 pm
Location: Tampa, Fl
Motorcycle: 1997 Goldwing GL 1500 SE

Parasitic Draw Testing - New To Me

Post by Bluewaterhooker0 » Fri Sep 22, 2017 10:26 pm



I came across this YouTube video a couple of days ago, and thought some folks here might find it as interesting as I did. I've never heard of such a thing.
They don't explain the methodology too well, but as near as I can determine, everything conductor has resistance, and someone has gone to the trouble of determining the exact resistance of common fuses. With that known, measuring the voltage drop across any given fuse (mv) can provide an extrapolation of the current passing through that circuit. The benefit, as explained in the video, is that neither the fuse being removed, nor the circuit being broken, is needed in order to determine the current passing through the circuit. Pretty neat. There are charts that accompany different types of fuses. I am posting the video, a link to the downloadable .pdf file charts, and a portion of the chart most common for the Goldwing.
Enjoy !





http://info.powerprobe.com/fusechartsdownload
Attachments





Swagonmaster
Posts: 8
Joined: Sun Apr 16, 2017 3:30 pm
Location: High Point, NC
Motorcycle: 1990 gl1500 SE

Re: Parasitic Draw Testing - New To Me

Post by Swagonmaster » Sat Sep 23, 2017 1:07 pm

I have seen the same information from a different sources but it is similar. It's most valuable when the expected current draw is known so you can differentiate between a device that won't turn off and a short circuit but this will definitely tell you that something is drawing juice.

topgun
Posts: 51
Joined: Fri Jul 31, 2009 10:24 pm
Location: sterling, il
Motorcycle: 2003 GL1800

Re: Parasitic Draw Testing - New To Me

Post by topgun » Sat Sep 23, 2017 8:21 pm

That "someone " would be the manufacturer of fuses. Fuses have some resistance and therefore also a voltage drop.
Resistance causes heat, and when the circuit causes enough heating to equal the rating, the fuse element
melts or as we like to say "blows".

User avatar
ekvh
Posts: 223
Joined: Thu Apr 29, 2010 9:52 am
Location: Grand Forks, ND
Motorcycle: 1977 gl1000

Re: Parasitic Draw Testing - New To Me

Post by ekvh » Sun Sep 24, 2017 4:27 pm

Neat, thanks for sharing.



Post Reply