O-rings for 1985 GL1200 Ltd


Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
gg125067
Posts: 7
Joined: Sun Aug 30, 2009 4:42 pm
Location: Aurora, IL
Motorcycle: 1985 GL1200 Ltd
1983 VT500 Shadow
1985 VT350 Yamaha

O-rings for 1985 GL1200 Ltd

Postby gg125067 » Wed Sep 09, 2009 11:29 am



I am looking for some one that has or can get the following items for the intake manifold system:
91304-MG9-951 qty = 4
16010-MG9-951 qty = 1

Thanks!
Gene



User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: O-rings for 1985 GL1200 Ltd

Postby WingAdmin » Wed Sep 09, 2009 2:01 pm

I looked them both on up Google, and found this place that appears to have them available:

gg125067
Posts: 7
Joined: Sun Aug 30, 2009 4:42 pm
Location: Aurora, IL
Motorcycle: 1985 GL1200 Ltd
1983 VT500 Shadow
1985 VT350 Yamaha

Re: O-rings for 1985 GL1200 Ltd

Postby gg125067 » Thu Sep 10, 2009 8:41 am

I did the same thing but when you try to order them they are discontinued from Honda supply. So unless they have them in stock you are out of luck! Many of the supplier are catalog suppliers only.

User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: O-rings for 1985 GL1200 Ltd

Postby WingAdmin » Thu Sep 10, 2009 11:39 am

Ok, well I had a look through the GL1200 parts manual from the manuals page here. Here's what it shows:

91304-MG9-951 O-RING 13.8 x 2.9
16010-MG9-951 GASKET SET

The O-rings are pretty straightforward - 13.8 mm outer diameter, and the O-ring material itself is 2.9 mm thick. Doing a search on the web, it turns out this same sized O-ring is used on some Acuras, and it has a different part number: 91313-PR7-A10. So order a part 91313-PR7-A10 from an Acura dealer, and you should have what you need.

As for the gaskets, they look to be simple throttle body gaskets, from what I can see on the diagram - and if so, could be cut out of standard gasket material:

Gaskets (in yellow)
Gaskets (in yellow)


Hope that helps!

gg125067
Posts: 7
Joined: Sun Aug 30, 2009 4:42 pm
Location: Aurora, IL
Motorcycle: 1985 GL1200 Ltd
1983 VT500 Shadow
1985 VT350 Yamaha

Re: O-rings for 1985 GL1200 Ltd

Postby gg125067 » Thu Sep 10, 2009 12:11 pm

The #1 on the diagram is a O ring and not a gasket and no one has the dimensions. I'm going to try and measure one of the old ones. The big issue here is I currently don't have a metric calipers.




Return to “Tech Talk”




Who is online

Users browsing this forum: No registered users and 2 guests