Ignition control module schematic

Technical information and Q&A applicable to all years and models of Goldwings
  • Sponsored Links
Post Reply
Posts: 1
Joined: Tue May 25, 2010 6:50 pm
Location: Manteca, Ca
Motorcycle: 1985 GL1200 Aspencade

Ignition control module schematic

Post by gregwing » Tue May 31, 2011 1:56 pm

Does anyone know if there is a schematic available for the the goldwing ignition control module. I have an 85 goldwing and I'm pretty sure the module is bad. I need to do a couple of more checks to confirm, but it doesn't look good. The reason I would like the schematic, is that I've been in electronics for 40 years, and looking at the circuit card, it looks repairable. I saw that there is a company in Australia that claims they can rebuild modules. If I can find a schematic, I would take a crack at repairing them and if successful would offer the service to others. Also, if anyone has known bad module that I could experiment with, I would be interested in getting a hold of it. Worst case I could reverse engineer the schematic by dissecting the bad card.

Any help would be appreciated. I see used modules run about 2 to 3 hundred bucks.

Post Reply