GL1200 Fastener torque values


Reference information handy in one place - part numbers, aftermarket equivalents, circuit diagrams, and more
  • Sponsored Links
User avatar
WingAdmin
Site Admin
Posts: 17050
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

GL1200 Fastener torque values

Postby WingAdmin » Tue Jul 29, 2014 7:56 am



Air hose connector 8mm 6-9 ft-lb
Air pressure sensor 6-9 ft-lb
Front axle nut 12mm 40-47 ft-lb
Front axe holder nut 8mm 14-22 ft-lb
Front brake disc bolt 8mm 20-24 ft-lb
Front brake caliper bracket mount bolt (upper) 10mm 22-29 ft-lb
Front brake caliper bracket mount bolt (lower) 8mm 14-18 ft-lb
Brake caliper pivot bolt 12mm 18-22 ft-lb
Brake caliper bolt 8mm 14-18 ft-lb
Brake hose oil boll 10mm 18-25 ft-lb
Brake metal line joint nut 10mm 12-13 ft-lb
Front brake master cylinder holder bolt 6mm 7-10 ft-lb
Rear brake disc nut 8mm 20-24 ft-lb
Rear brake maser cylinder bolt 8mm 17-21 ft-lb
Rear brake rod joint lock nut 8mm 11-14 ft-lb
Real axle nut 18mm 61-76 ft-lb
Rear shock absorber mount nut (upper) 10mm 22-29 ft-lb
Rear shock absorber mount bolt (right) 8mm 14-18 ft-lb
Rear shock absorber mount bolt (right) 18mm 47-54 ft-lb
Rear axle pinch bolt 8mm 17-21 ft-lb
Swing arm pivot bolt (right) 30mm 58-87 ft-lb
Swing arm pivot bolt (left) 30mm 13-14 ft-lb
Swing arm pivot lock nut 30mm 58-87 ft-lb
Final drive gear case nut 8mm 17-22 ft-lb
Final drive gear case filler cap 30mm 7-10 ft-lb
Final drive gear case drain plug 6mm 7-10 ft-lb
Final drive gear case cover bolt (8mm) 17-20 ft-lb
Final drive gear case cover bolt (10mm) 33-36 ft-lb
Final drive pinion joint nut 16mm 72-87 ft-lb
Engine mount bolt/nut (12mm) 40-47 ft-lb
Engine mount bolt/nut (10mm) 22-29 ft-lb
Engine mount bolt/nut (8mm) 13-18 ft-lb
Sub frame cap nut 10mm 22-29 ft-lb
Footpeg bolt/nut 12mm 40-47 ft-lb
Passenger footpeg bolt 10mm 25-33 ft-lb
Exhaust pipe joint nut 8mm 11-14 ft-lb
Muffler mount bolt 10mm 25-33 ft-lb
Muffler joint bolt 8mm 14-17 ft-lb
Center stand pivol pinch bolt 8mm 11-14 ft-lb
Side stand pivot lock nut 10mm 14-17 ft-lb
Rear brake pedal bolt 8mm 13-18 ft-lb
Gearshift pedal 6mm 6-9 ft-lb
Rear fender mounting bolt 8mm 9-12 ft-lb
Seat mounting bolt 8mm 13-18 ft-lb
Starter motor cable terminal nut 6mm 3-8 ft-lb

All other fasteners:

5mm bolt and nut 3-4 ft-lb
5mm screw 2-4 ft-lb
6mm bolt and nut 6-9 ft-lb
6mm screw and 6mm flange bolt with 8mm head 5-8 ft-lb
6mm flange bolt and nut 7-10 ft-lb
8mm bolt and nut 13-18 ft-lb
8mm flange bolt and nut 17-22 ft-lb
10mm bolt and nut 22-29 ft-lb
10mm flange bolt and nut 25-33 ft-lb
12mm bolt and nut 36-43 ft-lb



User avatar
eklimek
Posts: 307
Joined: Tue Feb 15, 2011 1:55 pm
Location: St Catharines Ontario Canada
Motorcycle: 81 GL1100 (Widowmaker not in service), 83GL1100, CB350f x 6, CB400f x2, CB550f sold, CL350 (seized engine), plus enough donors to take me through retirement.

Re: GL1200 Fastener torque values

Postby eklimek » Wed Aug 20, 2014 8:34 am

Most fasteners are 6, 8 10, 12, the easy estimate torque values (before looking them up) is

8 ft-lb for 6 mm
(8 x2) 16 for 8mm
(8x3) 24 for 10 mm
(8x4) 32 for 12 mm

4 (half of 8) for 5 mm


Return to “Reference Information”




Who is online

Users browsing this forum: No registered users and 1 guest