Powerlet Outlets


Information and questions on GL1800 Goldwings (2018+)
  • Sponsored Links
Post Reply
User avatar
WingVetteGSXR
Posts: 41
Joined: Sat Oct 21, 2017 7:39 pm
Location: Fox Island, WA
Motorcycle: 2018 Tour DCT, 2006 Suzuki GSX-R600, 2018 Triumph Tiger 800 XCA
Contact:

Powerlet Outlets

Post by WingVetteGSXR » Sat Apr 21, 2018 12:17 am



OK, so where are you mounting your Powerlet Outlets? Need one in the back from SOs vest, and one in front for radar detector (will use cig ltr adapter) and/or vest. Also, anyone figure out where to hardwire a radar detector? I'm guessing will have to install an accessory connector like maybe the PDM60. With the CAN bus I ain't gonna tap into any random power wire somewhere.



doxbike
Posts: 41
Joined: Sat Nov 05, 2011 6:17 am
Location: laguna beach,ca
Motorcycle: 2018 gl1800bd

Re: Powerlet Outlets

Post by doxbike » Sun Apr 22, 2018 12:16 pm

here's the best option IMHO. 2 switched -one for gps or powelet, one for the VIRB camera; and one unswitched for battery tender. I had one in each of my several bikes. Quality stuff. Since I know nada about can bus, this feeds off the battery terminals and switches off the aux terminal in the fuse block, would rather be safe than sorry.
https://www.easternbeaver.com/Main/Wiri ... cs-hd.html

User avatar
WingVetteGSXR
Posts: 41
Joined: Sat Oct 21, 2017 7:39 pm
Location: Fox Island, WA
Motorcycle: 2018 Tour DCT, 2006 Suzuki GSX-R600, 2018 Triumph Tiger 800 XCA
Contact:

Re: Powerlet Outlets

Post by WingVetteGSXR » Sun Apr 22, 2018 1:19 pm

doxbike wrote:
Sun Apr 22, 2018 12:16 pm
here's the best option IMHO. 2 switched -one for gps or powelet, one for the VIRB camera; and one unswitched for battery tender. I had one in each of my several bikes. Quality stuff. Since I know nada about can bus, this feeds off the battery terminals and switches off the aux terminal in the fuse block, would rather be safe than sorry.
https://www.easternbeaver.com/Main/Wiri ... cs-hd.html
Thanks!

doxbike
Posts: 41
Joined: Sat Nov 05, 2011 6:17 am
Location: laguna beach,ca
Motorcycle: 2018 gl1800bd

Re: Powerlet Outlets

Post by doxbike » Sun Apr 22, 2018 1:40 pm

you're welcome. Even though he's in Japan, shipping is quick. While you're there, check out the posi-lock connectors and any other connectors you may need. I have always used his posi-locks as I've never been satisfied with the crimp on connectors- YMMV.



Post Reply