Tming Belt tensioner bolt Torque gl1000


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
1978wing
Posts: 2
Joined: Mon May 07, 2012 2:56 pm
Location: Eston sask canada
Motorcycle: 78 gl 1000

Tming Belt tensioner bolt Torque gl1000

Postby 1978wing » Sat Aug 04, 2012 1:36 am



Any one know how tight the bolts should be on the timing belt tensioners on my 1978 Gl1000..

thanks



User avatar
moffat
Posts: 264
Joined: Thu Aug 05, 2010 2:30 pm
Location: Northwich United Kingdom
Motorcycle: 1982 GL1100
Interstate

Re: Tming Belt tensioner bolt Torque gl1000

Postby moffat » Tue Aug 07, 2012 12:24 pm

The Haynes manual states "TIMING BELT PULLY BOLTS 12mm is 7-8 KGF M or 51-58 LBF F"

User avatar
Fred Camper
Posts: 1152
Joined: Sun Aug 16, 2009 9:15 pm
Location: Metro Detroit, MI
Motorcycle: 1977 GL1000, 1976 LTD GL1000

Re: Tming Belt tensioner bolt Torque gl1000

Postby Fred Camper » Tue Aug 07, 2012 9:21 pm

Until it yields, then back off a quarter turn lol. I looked in my Honda manual but did not see it listed so go with the above number.

1978wing
Posts: 2
Joined: Mon May 07, 2012 2:56 pm
Location: Eston sask canada
Motorcycle: 78 gl 1000

Re: Tming Belt tensioner bolt Torque gl1000

Postby 1978wing » Tue Aug 07, 2012 10:27 pm

was looking for the belt tightner bolt tension torque not the timing belt pulley bolt torque..
Called the honda dealer and yes up to 58 flbs for the pulley bolts.. but they did not have torque specs for the belt tension idler wheel bolts.




Return to “GL1000 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest