Where can i buy GL1000 Engine Parts


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
User avatar
Greg_C
Posts: 141
Joined: Sat Dec 22, 2012 10:01 am
Location: Nova Scotia Canada
Motorcycle: 1980 GL1100 Interstate (sold)
1976 GL1000 (WIP)

Where can i buy GL1000 Engine Parts

Postby Greg_C » Thu Mar 28, 2013 6:23 pm



I have an eye on a rebuild able GL1000 engine. Engine Already has new main bearings, rod bearings and rings. What i,m missing is front main shaft seal p/n 2314-371-000. This is shown on page 71' figure 76 of the Clymers service . Repair . Maintenance manual.

Can the experts on this site point me at links, sites or vendors who I can reach out to or find this seal and other internal engine parts. I,d like to rebuild this engine and get it running... and will document the rebuild on this site... Please don't just tell me to go buy another GL1000 engine ... Unless you are donating it and shipping it to me at no cost :-)...

Thanks all...

Greg


Current Rides:
1976 GL1000 (WIP)
2004 Dodge Ram 2500 Cummings Diesel - Camper puller
2006 Toyota Corolla - My Daily driver
Past Rides:
HMCS Assiniboine (DDH 234)
1980 Porsche 911 SC Targa
1979 MGB Roadster
1980 GL1100 Interstate

User avatar
SteveB123
Posts: 842
Joined: Thu Apr 05, 2012 9:29 am
Location: Winchester, Ontario, Canada
Motorcycle: 1982 1100I, 60A Poorboy, MSD coil

Re: Where can i buy GL1000 Engine Parts

Postby SteveB123 » Thu Mar 28, 2013 7:11 pm

Seals are common, once you know the size.

The front crank seal looks to be 35x58x8, going by the OEM drawings at BikeBandit.
Used as a tranny seal in manual Honda Fit, but any bearing shop will have one.
Current:82 GL1100 Interstate, 60 Amp Poorboy, MSD coil
Previous: 93 GSX1100F Katana
82 GL500 Silverwing

User avatar
Greg_C
Posts: 141
Joined: Sat Dec 22, 2012 10:01 am
Location: Nova Scotia Canada
Motorcycle: 1980 GL1100 Interstate (sold)
1976 GL1000 (WIP)

Re: Where can i buy GL1000 Engine Parts

Postby Greg_C » Thu Mar 28, 2013 9:44 pm

Steve,

Can you give me more details link wise on bike bandit site where u found this part and size detail... As I can't find what you are referring to... Sounds encouraging though

Thanks in advance..

Greg
Current Rides:
1976 GL1000 (WIP)
2004 Dodge Ram 2500 Cummings Diesel - Camper puller
2006 Toyota Corolla - My Daily driver
Past Rides:
HMCS Assiniboine (DDH 234)
1980 Porsche 911 SC Targa
1979 MGB Roadster
1980 GL1100 Interstate

User avatar
Placerville
Posts: 423
Joined: Tue Mar 09, 2010 12:58 pm
Location: Placerville, CA
Motorcycle: 1976 Naked Yellow

Re: Where can i buy GL1000 Engine Parts

Postby Placerville » Fri Mar 29, 2013 1:08 am

Is that part number correct? I plugged it into a Honda parts on-line site and it came back as 'part number not found'. (Not 'not available' but, 'not found'.) Also, why not go to Honda for your parts. If Bike Bandit has them, they're only buying them from Honda and reselling them to you.
Placerville- 1976 Yellow
Image

User avatar
SteveB123
Posts: 842
Joined: Thu Apr 05, 2012 9:29 am
Location: Winchester, Ontario, Canada
Motorcycle: 1982 1100I, 60A Poorboy, MSD coil

Re: Where can i buy GL1000 Engine Parts

Postby SteveB123 » Fri Mar 29, 2013 4:22 am

Current:82 GL1100 Interstate, 60 Amp Poorboy, MSD coil
Previous: 93 GSX1100F Katana
82 GL500 Silverwing

User avatar
SteveB123
Posts: 842
Joined: Thu Apr 05, 2012 9:29 am
Location: Winchester, Ontario, Canada
Motorcycle: 1982 1100I, 60A Poorboy, MSD coil

Re: Where can i buy GL1000 Engine Parts

Postby SteveB123 » Fri Mar 29, 2013 4:24 am

Placerville wrote:Is that part number correct? I plugged it into a Honda parts on-line site and it came back as 'part number not found'. (Not 'not available' but, 'not found'.) Also, why not go to Honda for your parts. If Bike Bandit has them, they're only buying them from Honda and reselling them to you.


BB doesn't buy from dealers...BB buys from Honda.
Current:82 GL1100 Interstate, 60 Amp Poorboy, MSD coil
Previous: 93 GSX1100F Katana
82 GL500 Silverwing

User avatar
Greg_C
Posts: 141
Joined: Sat Dec 22, 2012 10:01 am
Location: Nova Scotia Canada
Motorcycle: 1980 GL1100 Interstate (sold)
1976 GL1000 (WIP)

Re: Where can i buy GL1000 Engine Parts

Postby Greg_C » Fri Mar 29, 2013 7:07 am

Thanks for responses and info Steveb123 and Placerville.

I messed up in my P/N. it is 23141-371-000

It is found at end of the transmission main shaft inside engine...

Shown as item 4 on parts drawing E14 page 47 of the Honda parts manual found on this site

Is identified as: pass, main shaft oil

I,ll now check the links you guys provided.

Tks again
Current Rides:
1976 GL1000 (WIP)
2004 Dodge Ram 2500 Cummings Diesel - Camper puller
2006 Toyota Corolla - My Daily driver
Past Rides:
HMCS Assiniboine (DDH 234)
1980 Porsche 911 SC Targa
1979 MGB Roadster
1980 GL1100 Interstate

User avatar
SteveB123
Posts: 842
Joined: Thu Apr 05, 2012 9:29 am
Location: Winchester, Ontario, Canada
Motorcycle: 1982 1100I, 60A Poorboy, MSD coil

Re: Where can i buy GL1000 Engine Parts

Postby SteveB123 » Fri Mar 29, 2013 7:22 am

Greg_C wrote:Thanks for responses and info Steveb123 and Placerville.

I messed up in my P/N. it is 23141-371-000

It is found at end of the transmission main shaft inside engine...

Shown as item 4 on parts drawing E14 page 47 of the Honda parts manual found on this site

Is identified as: pass, main shaft oil

I,ll now check the links you guys provided.

Tks again


Ahh. Well, that's not a seal.
And it's N/A, so I guess it doesn't matter anyways.
Current:82 GL1100 Interstate, 60 Amp Poorboy, MSD coil
Previous: 93 GSX1100F Katana
82 GL500 Silverwing

User avatar
Greg_C
Posts: 141
Joined: Sat Dec 22, 2012 10:01 am
Location: Nova Scotia Canada
Motorcycle: 1980 GL1100 Interstate (sold)
1976 GL1000 (WIP)

Re: Where can i buy GL1000 Engine Parts

Postby Greg_C » Fri Mar 29, 2013 9:19 am

Good news!

The part I thought was an oil seal is in fact a metal oil passage piece with a rubber seal around it...

And this part i found with the other parts that need to go back into the engine...

I was looking for a plain rubber seal...

Thanks again for the links and help much appreciated...
Current Rides:
1976 GL1000 (WIP)
2004 Dodge Ram 2500 Cummings Diesel - Camper puller
2006 Toyota Corolla - My Daily driver
Past Rides:
HMCS Assiniboine (DDH 234)
1980 Porsche 911 SC Targa
1979 MGB Roadster
1980 GL1100 Interstate

User avatar
1grouch2u
Posts: 190
Joined: Wed Sep 08, 2010 1:08 pm
Location: Bonham, TX
Motorcycle: 1976 Honda Goldwing GL1000

Re: Where can i buy GL1000 Engine Parts

Postby 1grouch2u » Sat Mar 30, 2013 1:17 am

Greg_C wrote:Good news!

The part I thought was an oil seal is in fact a metal oil passage piece with a rubber seal around it...

And this part i found with the other parts that need to go back into the engine...

I was looking for a plain rubber seal...

Thanks again for the links and help much appreciated...



Here's another link- I've found good prices and service http://www.partzilla.com/ Cheers~!




Return to “GL1000 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests