Heel and toe shifter GL 1000


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
BaronBigDog
Posts: 12
Joined: Sat Aug 10, 2013 10:46 pm
Location: Magnet Cove, AR
Motorcycle: 1975 GL1000

Heel and toe shifter GL 1000

Postby BaronBigDog » Thu Dec 19, 2013 9:02 pm



Is there a kit to install a heel and toe shifter on a 75 GL 1000 that does not require floor boards? I want to stay with the stock pegs, but my foot is so big that I have a hard time wedging it into the shifter.

In addition is there a retro kit for the rear brake pedal that extends it outward and forward. Big feet again.

I can cobble something together for both issues, but I want something that looks good and do not have the time to do the job properly.



User avatar
Overdog
Posts: 172
Joined: Sat Oct 12, 2013 7:00 am
Location: Pittsburgh, Pennsylvania
Motorcycle: 83 Goldwing Interstate

74 BMW R90/6

Re: Heel and toe shifter GL 1000

Postby Overdog » Fri Dec 20, 2013 6:26 am

Not sure about the shifter but as for the brake pedal...I haven't done it yet but I've looked into it and on the 1100 you can adjust the linkage below the master cylinder and lower the pedal so you won't have to raise your foot to get on the pedal...that might help

BaronBigDog
Posts: 12
Joined: Sat Aug 10, 2013 10:46 pm
Location: Magnet Cove, AR
Motorcycle: 1975 GL1000

Re: Heel and toe shifter GL 1000

Postby BaronBigDog » Sat Dec 21, 2013 5:16 pm

Thanks much, I will give it a shot.


Return to “GL1000 Information & Questions”




Who is online

Users browsing this forum: dingdong and 1 guest