Wiring turn signal on a 78 Goldwing


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
User avatar
mmtindor
Posts: 13
Joined: Sun Sep 14, 2014 6:17 pm
Location: Columbus, Ohio
Motorcycle: 1978 Goldwing

Wiring turn signal on a 78 Goldwing

Post by mmtindor » Sun Oct 26, 2014 6:10 pm



Greetings-

I took off the front Vetter fairing on my 78 Goldwing. I"m trying to put on front turn signals, which I now own. Where in the world do I hook up the turn signals? The headlight is off and now I'm lost. I know where to bolt them onto the bike, and I"ve found the relay switch underneath the left side panel.

Any help is much appreciated.

M



SnoBrdr
Posts: 457
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: Wiring turn signal on a 78 Goldwing

Post by SnoBrdr » Mon Oct 27, 2014 10:44 am

mmtindor wrote:Greetings-

I took off the front Vetter fairing on my 78 Goldwing. I"m trying to put on front turn signals, which I now own. Where in the world do I hook up the turn signals? The headlight is off and now I'm lost. I know where to bolt them onto the bike, and I"ve found the relay switch underneath the left side panel.

Any help is much appreciated.

M
First place to start would be to get a shop manual.

Short of that, look here http://ngwclub.com/forum/viewtopic.php?t=9971.

Those are the wiring diagrams, your bikes wiring was prob punched all over using scotch locks.

Hopefully they actually left the original wires intact.

Post Reply



Who is online

Users browsing this forum: No registered users and 5 guests