carbs


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
2010*boozer
Posts: 3
Joined: Sun Sep 05, 2010 5:50 am
Location: Cusseta, Al
Motorcycle: 1979 GL1000 Goldwing

carbs

Postby 2010*boozer » Thu Sep 23, 2010 6:20 am



there used to be a co. that made 2 bbl carb to replace factory carbs can anyone tell me who it is thany you



dmartin304
Posts: 4
Joined: Thu Aug 26, 2010 7:59 pm
Location: Monterey, CA
Motorcycle: 1975 GL1000 Goldwing

Re: carbs

Postby dmartin304 » Thu Sep 23, 2010 10:13 am

You might start with http://www.cycleinnovations.com/
Good Luck.

2010*boozer
Posts: 3
Joined: Sun Sep 05, 2010 5:50 am
Location: Cusseta, Al
Motorcycle: 1979 GL1000 Goldwing

Re: carbs

Postby 2010*boozer » Thu Sep 23, 2010 12:56 pm

thanks but no help on goldwing

dmartin304
Posts: 4
Joined: Thu Aug 26, 2010 7:59 pm
Location: Monterey, CA
Motorcycle: 1975 GL1000 Goldwing

Re: carbs

Postby dmartin304 » Thu Sep 23, 2010 2:07 pm

Sorry about that. I guess the document that I have is older than I thought.

User avatar
Placerville
Posts: 423
Joined: Tue Mar 09, 2010 12:58 pm
Location: Placerville, CA
Motorcycle: 1976 Naked Yellow

Re: carbs

Postby Placerville » Fri Oct 01, 2010 1:50 pm

Go to http://www.ngwclub.com/ and join the site. Ask your question. You'll get help.
Placerville- 1976 Yellow
Image

User avatar
78AzWing
Posts: 126
Joined: Sun Oct 04, 2009 4:50 pm
Location: San Tan Valley, Arizona
Motorcycle: 1978 GL1000 UnDressed and Progressively Weber Carbureted

Re: carbs

Postby 78AzWing » Mon Oct 18, 2010 10:52 pm

CycleInnovations made one that directly replaced the carbs and you could mount either a 2bbl or 1bbl carb on it depending on the model of intake that you could buy.

CCProducts made one that you had to do a little more to install, cause it replaced the water crossover tubes and part of the thermostat housing from behind the temp/fan switch (you had to cut the housing off square, leaving enough of it there to clamp a hose onto it that went to the center of the manifold itself - I have that one on mine.)


Meddle not in the affairs of Dragons
For thee are Krunchie and taste goode with Ketchup!


Return to “GL1000 Information & Questions”




Who is online

Users browsing this forum: Google [Bot] and 1 guest