Light wiring help


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
aingeal89c
Posts: 7
Joined: Wed Sep 27, 2017 2:50 pm
Location: Phoenix, AZ
Motorcycle: 1981 GL1100

Light wiring help

Post by aingeal89c » Wed Sep 27, 2017 3:03 pm



So I picked up a 1981 gl1100. The original owner started making it into a bobber project and quit before selling it to the guy I got it from. Bobber dummy removed all the lights and luggage from it. So I need some pointers on the wiring cause I'm getting no power to my headlight and the tail light wiring is confusing.







SnoBrdr
Posts: 504
Joined: Fri Mar 07, 2014 9:01 am
Location: Providence, Rhode Island
Motorcycle: 1978 GL 1000

129K Original Owner

Re: Light wiring help

Post by SnoBrdr » Wed Sep 27, 2017 4:01 pm

aingeal89c wrote:
Wed Sep 27, 2017 3:03 pm
So I picked up a 1981 gl1100. The original owner started making it into a bobber project and quit before selling it to the guy I got it from. Bobber dummy removed all the lights and luggage from it. So I need some pointers on the wiring cause I'm getting no power to my headlight and the tail light wiring is confusing.20170927_125314.jpg
20170927_125343.jpg
Get yourself a service manual and a wiring diagram.

They are available here in color, you can either print it out or bring the file to a copy shop and have them print out a large size one.

aingeal89c
Posts: 7
Joined: Wed Sep 27, 2017 2:50 pm
Location: Phoenix, AZ
Motorcycle: 1981 GL1100

Re: Light wiring help

Post by aingeal89c » Thu Sep 28, 2017 8:43 am

Already did that, didn't help much in the current state it's in. Looks like I'll be chasing wires, cause the idiot left behind all the wires he should have removed too.

kndw
Posts: 28
Joined: Sat Jun 19, 2010 2:56 am
Location: Driebergen, Utrecht
Motorcycle: 1976 GL1000 Plempbak

Re: Light wiring help

Post by kndw » Thu Sep 28, 2017 3:48 pm

blue = big light,
white = normal light,
green = ground,
orange = left blinker
light blue = right blinker.

Maybe blue and white is the other way around...

aingeal89c
Posts: 7
Joined: Wed Sep 27, 2017 2:50 pm
Location: Phoenix, AZ
Motorcycle: 1981 GL1100

Re: Light wiring help

Post by aingeal89c » Thu Sep 28, 2017 7:58 pm

My issue is I'm getting no power to the headlight, but the guage lights work.

kndw
Posts: 28
Joined: Sat Jun 19, 2010 2:56 am
Location: Driebergen, Utrecht
Motorcycle: 1976 GL1000 Plempbak

Re: Light wiring help

Post by kndw » Fri Sep 29, 2017 2:56 pm

Well, if neither the blue nor the white wire carry any oomph, than you'll just have to trace their paths.

User avatar
biker art
Posts: 18
Joined: Tue Aug 01, 2017 6:31 pm
Location: Grants Pass,Or.
Motorcycle: 1975 Gold Wing

Re: Light wiring help

Post by biker art » Thu Oct 05, 2017 4:51 pm

Had almost the same problem. My bike had a vetter fairing installed and I removed it,the wiring was a mess. I had to cut all the fairing wires out and trace all the lighting wires. I finally got it working but it was a pain. Just one light at a time. I started with the tail end first.It's the only way ,use the color codes in the wiring diagram.

aingeal89c
Posts: 7
Joined: Wed Sep 27, 2017 2:50 pm
Location: Phoenix, AZ
Motorcycle: 1981 GL1100

Re: Light wiring help

Post by aingeal89c » Fri Oct 06, 2017 1:32 pm

Thanks. I have ordered new bar switches as I have been having issues with the signals not working properly either. Once those get here, will start rewiring.



Post Reply