Tensioner pulley change


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
gfrench5@hotmail.com
Posts: 13
Joined: Sat Nov 25, 2017 1:41 pm
Location: Ontario
Motorcycle: 1976 Honda GL1000

Tensioner pulley change

Post by gfrench5@hotmail.com » Sat Jan 13, 2018 2:16 pm



Hi guys, Thanks for all the previous help, as things move forward I have the new cam belts, also bought new tensioner pulleys I plan on installing. But really, I have 45,000 miles on this bike and the original pulleys seem perfectly good, no play or noise. At what point do these wear? Has anyone had a tensioner pulley fail? I will probably make the change but I'm curious as to failure rate and your mileage at failure and opinion? Thanks in advance Glen French



User avatar
Fred Camper
Posts: 1250
Joined: Sun Aug 16, 2009 9:15 pm
Location: Metro Detroit, MI
Motorcycle: 1977 GL1000, 1976 LTD GL1000

Re: Tensioner pulley change

Post by Fred Camper » Mon Jan 15, 2018 9:55 am

Not a common failure, they seem to be a pretty stout design. But on an interference engine, some caution is a good idea. Usually that just means a belt change.

gfrench5@hotmail.com
Posts: 13
Joined: Sat Nov 25, 2017 1:41 pm
Location: Ontario
Motorcycle: 1976 Honda GL1000

Re: Tensioner pulley change

Post by gfrench5@hotmail.com » Mon Jan 15, 2018 7:57 pm

Thanks for the info, Fred. Very much appreciated, Regards Glen

User avatar
Maz
Posts: 459
Joined: Tue May 19, 2015 4:43 am
Location: Kent, UK
Motorcycle: 1975 GL1000K1
1976 CB500T
1979 CB750L
1990 Yamaha FJ1200
1993 Suzuki GS500E

Re: Tensioner pulley change

Post by Maz » Tue Jan 16, 2018 10:23 am

gfrench5@hotmail.com wrote:
Sat Jan 13, 2018 2:16 pm
Hi guys, Thanks for all the previous help, as things move forward I have the new cam belts, also bought new tensioner pulleys I plan on installing. But really, I have 45,000 miles on this bike and the original pulleys seem perfectly good, no play or noise. At what point do these wear? Has anyone had a tensioner pulley fail? I will probably make the change but I'm curious as to failure rate and your mileage at failure and opinion? Thanks in advance Glen French
I changed mine at 80,000 miles. I removed them to examine them, when I changed the belts and although there was no play in them, they seemed to spin a bit too freely and felt very slightly gritty. I modified the backplates and fitted the Hyundai tensioners. Cost £15 each instead of £70 each from David Silver Spares and they work perfectly.

Maz
Nostalgia is not what it used to be!

User avatar
RBGERSON
Posts: 3029
Joined: Tue Mar 09, 2010 7:57 am
Location: SCOTTSDALE, AZ
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: Tensioner pulley change

Post by RBGERSON » Sun Jan 21, 2018 9:25 am

Generally they start to whine when they are really bad..well before they can do any real damage to teh belts. But as long as you are there and $$ is not an issue..change them???


HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE

FAIR WINDS,
RB

Post Reply