Front Forks


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
Post Reply
danielklinger
Posts: 22
Joined: Sun May 17, 2015 4:04 pm
Location: United States
Motorcycle: 1977 GL1000 Goldwing

Front Forks

Post by danielklinger » Fri Mar 09, 2018 10:13 pm



I just replaced the seals in my front forks. I was wondering...I noticed the springs are different on each end. I assume the bigger end goes down and the narrower end goes up. Is this correct? I didn't notice how they were when I took them out of the fork. Thanks for your feedback if you have any thoughts. Thanks, Dan



kndw
Posts: 47
Joined: Sat Jun 19, 2010 2:56 am
Location: Driebergen, Utrecht
Motorcycle: 1976 GL1000 Plempbak

Re: Front Forks

Post by kndw » Sun Mar 11, 2018 4:12 pm

Those are progressive springs; an upgrade. You are right about the orientation. Narrow part goes up.

Post Reply