77 Goldwing rear blinkers


Information and questions on GL1000 Goldwings (1975-1979)
  • Sponsored Links
User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

77 Goldwing rear blinkers

Postby MACKCL1998 » Tue Apr 26, 2011 5:33 pm



Another stupid question. I have a 77 goldwing that for years had saddlebags and a fairing. I am in the process of returning the bike to its original condition a (Naked wing). After removing all the spliced in light harnesses for the saddlebags stop turn, and running lights then installing original rear blinkers I have a question.
The front blinkers work as intended and also stay lit as a marker light as well as the headlight. The rear blinkers work as intended but do not stay lit as a marker light.
I can not for the life of me remember if this is the way they worked originally? The stop light is lit all the time as well as getting brighter when brakes are applied. I do have one wire that is black with a green band on it. It is connected to a green wire which I assume is a ground. Anyway this wire is connected to nothing! Maybe it was part of the saddlebag light system?



User avatar
littlebeaver
Posts: 4420
Joined: Mon Sep 21, 2009 6:11 pm
Location: Kansas City, Kansas
Motorcycle: 1981 gl 1100 I , 79 Yamaha XS11
Special, 82 Kawa 750 CSR, 82 Kawa 750 LTD, 03 Kawa Nomad 1500, 99 Kawa Voyager 1200

Re: 77 Goldwing rear blinkers

Postby littlebeaver » Tue Apr 26, 2011 5:38 pm

I think that's right, just the taillight should be on with it's running light..Isn't it?

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Tue Apr 26, 2011 6:09 pm

littlebeaver wrote:I think that's right, just the taillight should be on with it's running light..Isn't it?


Thanks littlebeaver, I just could not remember. I just found out that the DOT does not allow amber lenses to be used as
running or clearance lights in the rear! If I wanted running lights in the rear they have to be red! I want a naked wing but would
like more lighting in the rear of the bike!

User avatar
Fewman
Posts: 38
Joined: Wed Sep 29, 2010 7:57 pm
Location: Drake, CO
Motorcycle: '75 GL1000

Re: 77 Goldwing rear blinkers

Postby Fewman » Tue Apr 26, 2011 7:59 pm

No running lights in rear. Stock light fixture supported only a 1156 bulb for the winkers.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Tue Apr 26, 2011 9:51 pm

Fewman wrote:No running lights in rear. Stock light fixture supported only a 1156 bulb for the winkers.


Thank you Fewman. I bought the bike new in 1977, then added fairing, trunk, and saddlebags. After 34 years I forgot
how the lights worked in the rear. With the bags on I had three stop, two side marker, and two large turn signal lights!

User avatar
Fewman
Posts: 38
Joined: Wed Sep 29, 2010 7:57 pm
Location: Drake, CO
Motorcycle: '75 GL1000

Re: 77 Goldwing rear blinkers

Postby Fewman » Wed Apr 27, 2011 7:27 am

I bought mine new in '75 and had a similar set-up with Wixom bags...but now I'm naked, like it was new.

User avatar
dingdong
Posts: 2863
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500
2004 NRX1800 Rune

Re: 77 Goldwing rear blinkers

Postby dingdong » Wed Apr 27, 2011 8:35 am

If you want to convert to red running lights here are red lenses on e-bay.

http://cgi.ebay.com/ebaymotors/Honda-Re ... 3f0945e02b
Tom

A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

User avatar
landisr
Posts: 393
Joined: Tue Jul 28, 2009 12:18 pm
Location: Gilbert, AZ
Motorcycle: 1976 GL1000
1994 GL1500A

Re: 77 Goldwing rear blinkers

Postby landisr » Wed Apr 27, 2011 9:26 am

If you want to convert your stock turn signals to running/brake/turn signals using the original the stock bulb, etc, find yourself a Priority Lites module. It's a small sealed unit that is installed between your bike's wiring harness and the rear light assembly. I have one on my naked '76 and love it. It is really lit up nice back there, and looks bone stock (except mine are tucked in, mounted on the sides of the tail light bracket. I have retained the amber lenses, because they are brighter than the red. The only legal issue is that they act as amber running lights at half voltage, but function normally as amber turn signals. I have yet to be stopped while using it for over 3 years, just as I have never been stopped or questioned about the blue Ring Of Fire on the front of my 1500. It seems to be the descretion of an officer whether to make issue, and if it appears to him that you are not flaunting the law, but are showing extra efforts for safety, they pretty much leave you alone.

My $0.02 Ron in MI
Beam me up, Scotty. There's no intelligent life down here.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Wed Apr 27, 2011 11:11 am

dingdong wrote:If you want to convert to red running lights here are red lenses on e-bay.

http://cgi.ebay.com/ebaymotors/Honda-Re ... 3f0945e02b



Hey dingdong thanks for the tip, I may go this route. Will probably have to change bulb socket to accept double filament bulb and run another wire for use as running light.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Wed Apr 27, 2011 11:24 am

landisr wrote:If you want to convert your stock turn signals to running/brake/turn signals using the original the stock bulb, etc, find yourself a Priority Lites module. It's a small sealed unit that is installed between your bike's wiring harness and the rear light assembly. I have one on my naked '76 and love it. It is really lit up nice back there, and looks bone stock (except mine are tucked in, mounted on the sides of the tail light bracket. I have retained the amber lenses, because they are brighter than the red. The only legal issue is that they act as amber running lights at half voltage, but function normally as amber turn signals. I have yet to be stopped while using it for over 3 years, just as I have never been stopped or questioned about the blue Ring Of Fire on the front of my 1500. It seems to be the descretion of an officer whether to make issue, and if it appears to him that you are not flaunting the law, but are showing extra efforts for safety, they pretty much leave you alone.

My $0.02 Ron in MI

Thanks for your$0.2 Ron. I have heard of Priority Lites Modules, but thought they were only for a pulsating headlight or tail lite. Have you added extra lights or are you running the modules as I stated?

User avatar
landisr
Posts: 393
Joined: Tue Jul 28, 2009 12:18 pm
Location: Gilbert, AZ
Motorcycle: 1976 GL1000
1994 GL1500A

Re: 77 Goldwing rear blinkers

Postby landisr » Wed Apr 27, 2011 8:09 pm

Right now that's all that's back there. I believe those other modules might be made by the same company. But after I get the new FIAMM horns hooked up, I'll probably start putting some small LED lights here and there for additional effect. I like the idea that the module takes minimal power and the running lights only take about 8 watts total. And the bike will never 'notice' the LEDs.

Ron

PS. Here's a little more info on it/them..
http://www.soundoffrec.com/products/lights.aspx
I thinks BikeBandit.com has them, among others.
Beam me up, Scotty. There's no intelligent life down here.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Thu Apr 28, 2011 8:16 am

landisr wrote:Right now that's all that's back there. I believe those other modules might be made by the same company. But after I get the new FIAMM horns hooked up, I'll probably start putting some small LED lights here and there for additional effect. I like the idea that the module takes minimal power and the running lights only take about 8 watts total. And the bike will never 'notice' the LEDs.

Ron

PS. Here's a little more info on it/them..
http://www.soundoffrec.com/products/lights.aspx
I thinks BikeBandit.com has them, among others.


Thanks Ron for the link to the modules, I will probably go this route. My question though is that the rear lights are single filament 1157 bulbs. Do I have to convert the light fixture to a 2 wire light?
Our last conversation about amber or red tail lights for running lights, MA Registry of Motor Vehicles says that yellow running lights in the rear are DOT and MA illegal. That being said I have purchased the red lenses that Dingdong mentioned.

User avatar
Fewman
Posts: 38
Joined: Wed Sep 29, 2010 7:57 pm
Location: Drake, CO
Motorcycle: '75 GL1000

Re: 77 Goldwing rear blinkers

Postby Fewman » Thu Apr 28, 2011 9:16 am

I thought #1156 was single filament and #1157 the double...?

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Thu Apr 28, 2011 9:34 am

Fewman wrote:I thought #1156 was single filament and #1157 the double...?


My bad! You are correct the 1156 is a single filament!

User avatar
landisr
Posts: 393
Joined: Tue Jul 28, 2009 12:18 pm
Location: Gilbert, AZ
Motorcycle: 1976 GL1000
1994 GL1500A

Re: 77 Goldwing rear blinkers

Postby landisr » Thu Apr 28, 2011 10:50 am

The Priority Lites use the 1156 bulbs you have now. They just run them at half voltage as running lites. No bulb or socket replacement necessary. Neat, huh?

Ron
Beam me up, Scotty. There's no intelligent life down here.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Thu Apr 28, 2011 7:05 pm

landisr wrote:The Priority Lites use the 1156 bulbs you have now. They just run them at half voltage as running lites. No bulb or socket replacement necessary. Neat, huh?

Ron


Neat it is Ron, and I thank you for the tip! I am in the middle of removing the fairing and all the soldered in wiring that goes with it. Rummaging trying to find everything I took off 33 years ago to return it to naked.
Dom

User avatar
landisr
Posts: 393
Joined: Tue Jul 28, 2009 12:18 pm
Location: Gilbert, AZ
Motorcycle: 1976 GL1000
1994 GL1500A

Re: 77 Goldwing rear blinkers

Postby landisr » Thu Apr 28, 2011 7:50 pm

Great project. I'm sure you will enjoy the end product. I putts down back roads at 40-50 mph with a silly grin on my face. Great offset from my long distance rides on my 1500.
Beam me up, Scotty. There's no intelligent life down here.

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Thu Apr 28, 2011 9:26 pm

landisr wrote:Great project. I'm sure you will enjoy the end product. I putts down back roads at 40-50 mph with a silly grin on my face. Great offset from my long distance rides on my 1500.


Just turned 68 in April. The bike fully loaded was getting to be too much for me to handle. Can't justify selling it! I had no problem riding it. Putting on the rear stand or just pushing it around was a chore.
Price of gas nuts! I will park the truck and use the bike as my daily driver! Stay safe Ron and again thanks for the tips!
Dom

kmassey
Posts: 8
Joined: Mon Dec 21, 2009 10:03 pm
Location: Houston,Texas
Motorcycle: 1976 GL1000
2002 GL 1800

Re: 77 Goldwing rear blinkers

Postby kmassey » Sun May 01, 2011 11:27 am

Fewman wrote:No running lights in rear. Stock light fixture supported only a 1156 bulb for the winkers.

Thats the way my 75 is.
Kurt

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Sun May 01, 2011 12:28 pm

kmassey wrote:
Fewman wrote:No running lights in rear. Stock light fixture supported only a 1156 bulb for the winkers.

Thats the way my 75 is.

Kurt


Thanks for the feedback Kurt. My bike is now back to naked! The lights are running as stock, the way yours are.
I have ordered the module that Ron suggested, and have purchased the red lenses that Dindong mentioned. I will be going that route and
will post results!
Dom

User avatar
MACKCL1998
Posts: 18
Joined: Tue Apr 19, 2011 5:13 pm
Location: Weymouth, Massachusetts
Motorcycle: 1977 GL1000 Goldwing

Re: 77 Goldwing rear blinkers

Postby MACKCL1998 » Tue May 10, 2011 6:38 pm

MACKCL1998 wrote:
landisr wrote:If you want to convert your stock turn signals to running/brake/turn signals using the original the stock bulb, etc, find yourself a Priority Lites module. It's a small sealed unit that is installed between your bike's wiring harness and the rear light assembly. I have one on my naked '76 and love it. It is really lit up nice back there, and looks bone stock (except mine are tucked in, mounted on the sides of the tail light bracket. I have retained the amber lenses, because they are brighter than the red. The only legal issue is that they act as amber running lights at half voltage, but function normally as amber turn signals. I have yet to be stopped while using it for over 3 years, just as I have never been stopped or questioned about the blue Ring Of Fire on the front of my 1500. It seems to be the descretion of an officer whether to make issue, and if it appears to him that you are not flaunting the law, but are showing extra efforts for safety, they pretty much leave you alone.

My $0.02 Ron in MI

Thanks for your$0.2 Ron. I have heard of Priority Lites Modules, but thought they were only for a pulsating headlight or tail lite. Have you added extra lights or are you running the modules as I stated?


Project done! Priority lite module is sweet. Changed out amber lenses for red. Lots of light back there now! Got MA inspection sticker no problem.
Thanks for the tip
Dom

User avatar
landisr
Posts: 393
Joined: Tue Jul 28, 2009 12:18 pm
Location: Gilbert, AZ
Motorcycle: 1976 GL1000
1994 GL1500A

Re: 77 Goldwing rear blinkers

Postby landisr » Wed May 11, 2011 12:01 pm

Excellent! Congrats, and enjoy! Ron


Beam me up, Scotty. There's no intelligent life down here.


Return to “GL1000 Information & Questions”




Who is online

Users browsing this forum: dingdong and 1 guest