COOLANT CROSSOVER TUBES?


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
marine6064
Posts: 2
Joined: Wed Dec 02, 2009 5:45 pm
Location: van buren,ar
Motorcycle: 1981 gl1100 i 1977 bmw r75/7

COOLANT CROSSOVER TUBES?

Postby marine6064 » Tue Jan 19, 2010 8:33 pm



I WILL BE REPLACING THE O RINGS IN THE CROSSOVER TUBES,FLUSHING THE RADIATOR,AND REPLACING THE GASKETS ON THE CONNECTIONS TO THE HEAD. ANY HELP ON THIS GREATLY APPRECIATED



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: COOLANT CROSSOVER TUBES?

Postby WingAdmin » Wed Jan 20, 2010 12:20 pm

A lot of what you're going to need to do will be covered in this article: How to remove and replace your water pump. You can get to the crossover tubes from the front if you pull the radiator, but the easier way is to pull the tank and air filter box off, remove the carburetor assembly, and go in from the top. You just unbolt each crossover tube at the end, and they pull right off.


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: gbh679, MSNbot Media [Bot] and 2 guests