7 volt regulator

Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Posts: 4
Joined: Thu Nov 19, 2009 7:59 am
Location: Centralia, Ill.
Motorcycle: Honda 1982GL1100A Aspencade

7 volt regulator

Postby rthomas » Thu Feb 25, 2010 2:50 pm

I put a new 7volt regulator in my 82 Aspencade and the gas guage and temp. still is not working. What could it be? Is there an inline fuse or could the guages just be bad. Any suggestions.

User avatar
Site Admin
Posts: 16907
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 7 volt regulator

Postby WingAdmin » Thu Feb 25, 2010 3:15 pm

The first thing to do is to measure the voltage at the screw terminal on the back of the gauge cluster - the one where the spade wire screws onto. Measure the voltage between there and ground while the bike is turned "on" (engine doesn't have to be running, but headlight should be on). You should see very close to 7 volts there. If not, you've got a problem with your regulator, or a connection leading to it.

Is everything else electrical working correctly on your bike?

Return to “GL1100 Information & Questions”

Who is online

Users browsing this forum: No registered users and 2 guests