Honda 1980 GL1100 exhaust

Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
Posts: 1
Joined: Wed Sep 19, 2012 7:46 pm
Location: New York, New York
Motorcycle: 1980 GL1100

Honda 1980 GL1100 exhaust

Post by narrowfarm » Wed Sep 19, 2012 7:55 pm

Hello i am looking for a 4 into 1 exhaust for my goldwing.I just want something that looks and sounds tuff !! do they make anything like that??? thanks john

User avatar
Posts: 613
Joined: Fri May 06, 2011 3:49 pm
Location: Marblemount,wa
Motorcycle: 1975 GL1000

Re: Honda 1980 GL1100 exhaust

Post by scotterichmond » Thu Sep 20, 2012 10:31 am

none that I have found, if you do find it , please let us know too. something like this ? got no idea where or if it is availible ( just stumbled on this pic)

Posts: 245
Joined: Wed Mar 07, 2012 8:20 am
Location: Southern NH, home again!
Motorcycle: 1982 gl 1100standard, 1983 1000c

Re: Honda 1980 GL1100 exhaust

Post by goldminerusa » Sat Sep 22, 2012 7:49 pm

The tags (registration plates) on the car and truck look like Ohio. Try the naked goldwing club.

User avatar
Posts: 842
Joined: Thu Apr 05, 2012 9:29 am
Location: Winchester, Ontario, Canada
Motorcycle: 1982 1100I, 60A Poorboy, MSD coil

Re: Honda 1980 GL1100 exhaust

Post by SteveB123 » Sun Sep 23, 2012 6:21 am

If it originated at NGW, it was built, not bought.
Current:82 GL1100 Interstate, 60 Amp Poorboy, MSD coil
Previous: 93 GSX1100F Katana
82 GL500 Silverwing

User avatar
Posts: 3118
Joined: Tue Mar 09, 2010 7:57 am
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: Honda 1980 GL1100 exhaust

Post by RBGERSON » Sun Sep 23, 2012 7:50 am

NO they don't but not too tough to make one..cut one side off just after the crossover pipe..cap it. Then cut the other side off aroudn the same place +/- and find a muffler you like like a Kerker add a connector piece and you are done. If you really want to make it nice cut before the cross over and fit a curved connector from the header to the crossover stub from the other side.

OR...keep your stock mufflers just in case. Pick up a set of Gl1000 headers 75 to 77..make a connector piece (90* curve from 2/4 side over to a "T" on the 1/3 header) muffler shop could make one for you and add your muffler of choice.


User avatar
Site Admin
Posts: 19056
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Honda 1980 GL1100 exhaust

Post by WingAdmin » Mon Sep 24, 2012 2:18 pm

goldminerusa wrote:The tags (registration plates) on the car and truck look like Ohio. Try the naked goldwing club.
Definitely Ohio.

Post Reply