I need help


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
User avatar
Gunnar Már
Posts: 44
Joined: Thu Aug 23, 2012 5:11 pm
Location: Reykjav�k, Reykjavik, Iceland
Motorcycle: Honda Gl 1100
1983

I need help

Postby Gunnar Már » Tue Dec 04, 2012 3:20 pm



Hi all
Now in the winter time I´m going trough the brakes on my 83 wing.
I got piston seals and dust seal for one caliper from the PO and it´s for the right one in front ( my bike has linked brakes )
The right one is 25mm in diameter and the part numbers are 45209-GE2-006 and 45109-GE2-006.
The left caliper is 32mm in diameter and I really need the part numbers for the piston seal and dust seal for that one.
And does anyone know what size the rear one is? I think it´s the same as the one it´s linked to in the front but I haven´t pulled it apart yet and I´m going to order for both the left front and the rear in the same order.
Thanks a lot in advance

Best to all
Gunnar Már



User avatar
WINGER3
Posts: 202
Joined: Fri Oct 05, 2012 11:41 pm
Location: Orange, California
Motorcycle: current 2005 GL1800ABS previous GL1200A GL1500K GL1100A CB350 GL650I VFR1000 ST1100 GL1200A GL1500I + many other brands

Re: I need help

Postby WINGER3 » Tue Dec 04, 2012 4:56 pm

Gunnar Már wrote:Hi all
Now in the winter time I´m going trough the brakes on my 83 wing.
I got piston seals and dust seal for one caliper from the PO and it´s for the right one in front ( my bike has linked brakes )
The right one is 25mm in diameter and the part numbers are 45209-GE2-006 and 45109-GE2-006.
The left caliper is 32mm in diameter and I really need the part numbers for the piston seal and dust seal for that one.
And does anyone know what size the rear one is? I think it´s the same as the one it´s linked to in the front but I haven´t pulled it apart yet and I´m going to order for both the left front and the rear in the same order.
Thanks a lot in advance

Best to all
Gunnar Már

Hi Ginnar Mar, I just picked up a set for the rear of my Asp., the piston seal is #45209-MA7-006, THE DUST SEAL IS 45109-MA7-006. You should be able to get the part numbers for the other front caliper from the Bike Bandit or Cheap Cycle Parts. Hope this helps. Bob :mrgreen:
DON'T DESTROY IT-RESTORE IT

User avatar
Gunnar Már
Posts: 44
Joined: Thu Aug 23, 2012 5:11 pm
Location: Reykjav�k, Reykjavik, Iceland
Motorcycle: Honda Gl 1100
1983

Re: I need help

Postby Gunnar Már » Tue Dec 04, 2012 5:11 pm

Thanks
This is what I dug up but I wasn´t sure enough to order, Honda dealer in Iceland dosn´t have anything I need so I have to order everything from over seas.
I´ve been ordering from David silver in the UK and I like it.
Now I can put in an order to finish this.

Thanks a lot.

Gunnar Már


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 3 guests