Camper trailer


Information, ideas, experiences and help with camping, pulling a trailer and roughing it on your Goldwing
  • Sponsored Links
User avatar
1fastgl1100
Posts: 131
Joined: Mon Apr 22, 2013 5:33 pm
Location: Ocala, Florida
Motorcycle: 1983 GL1100A and 1982 GL1100A Modified

Camper trailer

Postby 1fastgl1100 » Wed Apr 24, 2013 3:46 am



I want to build a camper trailer that I can tow with my 82 GL1100? before I start I want to know what the towing capabilities of the bike are. (owners manual says towing a trailer is not recommended)
Then does anyone have any ideas on a starting platform? (I was thinking of a 40" x 48" trailer from from Harbor Freight)

any help here???



User avatar
themainviking
Posts: 2579
Joined: Wed Sep 29, 2010 6:59 pm
Location: North Bay, Ontario, Canada
Motorcycle: 2009 GL1800 AD

Re: Camper trailer

Postby themainviking » Wed Apr 24, 2013 7:18 am

If you don't fill it too full, you would be fine. A 48" is a bit wide, because usually that is just the deck, and the wheels stick out further than that, but lots of trailers made for this purpose are close to this wide. It is towing something this wide that you must be cautious doing, because the trailer tracks inside of the bike on corners. If you have the choice, I would aim for 30 - 36". Then pop a car top carrier on it and you have a motorcycle cargo trailer. The big thing is tongue weight. You need to try for no more than 25 pounds tongue weight. The hitch systems that we can get for these bikes won't handle a terrific lot more than that. Another thing that isn't fantastic about solid axle riding on springs utility trailers like the HB type is that their suspensions are too stiff for the purpose. They bounce a whole lot without a load in them.
It ain't about the destination - it's all about the journey

ImageImage

User avatar
Wilcoy02
Posts: 725
Joined: Sun Nov 21, 2010 11:37 pm
Location: Marengo, Ohio
Motorcycle: 1983 GL1100 I purchased 3/16

1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15


98 valkyrie sold 8/16

Re: Camper trailer

Postby Wilcoy02 » Wed Apr 24, 2013 12:09 pm

I used HF trailer and put the car top carrier on it. Works great. I took one of the leaf springs out to prevent the bouncing. I only run about 20 # air in the tires
like said before do not try to haul the kitchen sink and bathtub with it.

I have gl1100 and it pulls nicely.
Attachments

User avatar
1fastgl1100
Posts: 131
Joined: Mon Apr 22, 2013 5:33 pm
Location: Ocala, Florida
Motorcycle: 1983 GL1100A and 1982 GL1100A Modified

Re: Camper trailer

Postby 1fastgl1100 » Wed Apr 24, 2013 2:36 pm

car topper is fine but you cant sleep in that... I want to build a camper and want to know if anyone has ever built one or do I need to buy one??

User avatar
Wilcoy02
Posts: 725
Joined: Sun Nov 21, 2010 11:37 pm
Location: Marengo, Ohio
Motorcycle: 1983 GL1100 I purchased 3/16

1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15


98 valkyrie sold 8/16

Re: Camper trailer

Postby Wilcoy02 » Wed Apr 24, 2013 4:10 pm

the second bike in the pic is a camper

User avatar
dingdong
Posts: 2864
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500
2004 NRX1800 Rune

Re: Camper trailer

Postby dingdong » Thu Apr 25, 2013 6:57 am

Check this out over at Saunders. May be just what you are looking for.

http://www.goldwingfacts.com/forums/2-g ... trike.html


Tom

A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.


Return to “Camping and Trailers”




Who is online

Users browsing this forum: No registered users and 0 guests