83 aspy air system


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
irefforu
Posts: 2
Joined: Thu Jan 03, 2013 8:12 am
Location: Great Falls, Montana
Motorcycle: 1983a aspencade

83 aspy air system

Postby irefforu » Sun Jun 02, 2013 8:46 pm



Help! I cant seem to get my air compressor to work with the switch. I have tryed everything in the manual, but no good. If I hook up power to compressor it woks. any help would be great. thanks.



User avatar
NKYWinger
Posts: 344
Joined: Sun Oct 02, 2011 6:37 pm
Location: Covington, KY
Motorcycle: 1983 GL1100A Aspencade
2003 GL1800

Re: 83 aspy air system

Postby NKYWinger » Mon Jun 03, 2013 12:31 pm

A couple of thoughts....
1) Have you cleaned/disassembled the switches to make sure they are making contact?
2) Have you done a continuity check on the wiring from the switches to the compressor?
--John--

FTCS(SS) USN Ret.
'83 GL1100 Aspy (SOLD)
'03 GL1800
'08 Lees-ure Lite
GWRRA 339547 KY - 'G'
DS# 1547

irefforu
Posts: 2
Joined: Thu Jan 03, 2013 8:12 am
Location: Great Falls, Montana
Motorcycle: 1983a aspencade

Re: 83 aspy air system

Postby irefforu » Mon Jun 03, 2013 5:22 pm

Yes, I have done this that is why the mystery. Have checked every thing I can think of. Thanks for the thought.

User avatar
WingAdmin
Site Admin
Posts: 17045
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 83 aspy air system

Postby WingAdmin » Thu Jun 13, 2013 11:24 pm

What is the ignition key set to when you try? On the earlier 1100's the compressor only runs if the key is in the "P" position, and I believe the 83 is the same.




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 3 guests