Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
Posts: 1
Joined: Sat Jun 29, 2013 11:41 pm
Location: mayflower,arkansas
Motorcycle: 1982 GL1100 aspencade


Post by winddancer » Mon Jul 01, 2013 12:51 pm

I just bought a 1982 aspencade,the only problem I am having is that my clock does not work. I have checked all the fuses and they are all good.does anyone have any ideas how to fix this problem?

User avatar
Posts: 882
Joined: Sun Nov 21, 2010 11:37 pm
Location: Marengo, Ohio
Motorcycle: 1983 GL1100 I purchased 3/16

1983 GL1100I frame with an 80 engine. poor boy installed with C-5 ignition--DIED in Grande Prairie Alberta Canada 8/15

98 valkyrie sold 8/16

Re: clock

Post by Wilcoy02 » Mon Jul 01, 2013 9:12 pm

check the grounds. Or run a hot wire from the + battery to the clock and run a ground wire from the - battery to the clock--you'll know if the clock even works.

Gold Feaver
Posts: 27
Joined: Mon Apr 25, 2011 2:47 pm
Location: Alberta Canada
Motorcycle: 1983 GL1100 Aspencade

Re: clock

Post by Gold Feaver » Mon Jul 01, 2013 10:05 pm

If your techie you can take it apart and re solder the contacts. In all probability the clock is shot and the easiest way to fix it is, buy a stick on digital clock for 5 bucks and live with it. Other than that buy a used one that works and replace it.
Nothing says Nerd better, Like my Honda with 2 Computers
strapped to it!!

Post Reply