original floor board rubber replacement

Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Posts: 1
Joined: Mon Aug 12, 2013 3:31 pm
Location: Canada
Motorcycle: 1982 GL1100A

original floor board rubber replacement

Postby jasonc » Mon Aug 12, 2013 3:36 pm

any advice on how I can get the original floor board rubber replacement? they blew off on the hwy...lol

User avatar
Posts: 1839
Joined: Sun Jun 06, 2010 10:51 pm
Location: Castlegar BC, Canada
Motorcycle: 1997 1500SE

Re: original floor board rubber replacement

Postby RoadRogue » Mon Aug 12, 2013 11:56 pm

The floorboards are aftermarket ,not factory items. There are several different manufacturers . Posting a pic would help us give you some ideas of where to start. 8-)
Ride safe, Todd
Over night campers welcome

User avatar
Posts: 1993
Joined: Mon Jan 03, 2011 1:17 am
Location: Kapunda, SouthAustralia
Motorcycle: 1997 GL1500 Spectre Red Aspencade

Re: original floor board rubber replacement

Postby redial » Tue Aug 13, 2013 8:50 pm

Why not make some up using rubber mats cut to size? You may have your choice of colours
Len in Kapunda

The world is not going to finish today, as it is already tomorrow in Australia and New Zealand, and other islands of foreign nations such as Guam and Samoa.

User avatar
Posts: 2581
Joined: Tue Mar 09, 2010 7:57 am
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: original floor board rubber replacement

Postby RBGERSON » Wed Aug 14, 2013 8:08 am

My Ace sells rubber runners that look like most board rubber long grooves..buy a foot or two and cut to shape..helps the cut some paper to fit the boardsand use it as a pattern on the runner..measure twice cut once. then contact cement.


User avatar
Posts: 146
Joined: Wed Jan 19, 2011 11:37 pm
Location: Whortonsville, NC
Motorcycle: 2009 Honda Shadow Aero 750 with MT Trike Kit (sold 9/13)
1982 GL 1100 Interstate
w/1999 Lehman Trike Kit (sold 12/12)
1996 GL-1500A with 2009 Champion Trike Kit (sold 7/15)
2003 GL-1800 with 2113 Champion Trike Kit
2007 Aspen Sentry Camper (sold 5/12)
2012 Mini-Mate Kompac Kamper
2014 TO Slipstream Camper

Re: original floor board rubber replacement

Postby cal3san » Fri Aug 16, 2013 3:51 am

I bought a couple of Harbor Freight rubber mat squares (with slanted diamond threads, and, using my remaining floorboard as a template, cut a matching set for the 82 trike. Used Super LocTight spray glue to mount 'em. Got 'em for under $3.00 and was able to 2 sets - 1 front, 1 rear per square.

YNCM-USN Retired (1964-1990)
RVN Veteran (MCB-53 1968)

Return to “GL1100 Information & Questions”

Who is online

Users browsing this forum: No registered users and 5 guests