Onboard Compressor


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
1amp
Posts: 5
Joined: Wed May 15, 2013 9:00 pm
Location: Calgary, Alberta, Canada
Motorcycle: 1983 GL1100A Aspencade

Onboard Compressor

Postby 1amp » Wed Aug 14, 2013 11:17 pm



I have an 83 aspencade with electronic dash. Hoe can I tell when I have reached the right PSI in the front and rear forks. I know that the temp turns into PSI, but how do I read the psi.

Thanks



User avatar
NKYWinger
Posts: 344
Joined: Sun Oct 02, 2011 6:37 pm
Location: Covington, KY
Motorcycle: 1983 GL1100A Aspencade
2003 GL1800

Re: Onboard Compressor

Postby NKYWinger » Thu Aug 15, 2013 7:07 am

1amp - when you select front or rear (by pushing the appropriate button), the current pressure is displayed and there is a vertical bar displayed along side the pressure to indicate the recommended pressure range for either front or rear. There is also a picture of that in the Aspy Owners Manual that shows the same.

IIRC, the book says to always do the front before the rear due to the difference in recommended pressures......
--John--

FTCS(SS) USN Ret.
'83 GL1100 Aspy (SOLD)
'03 GL1800
'08 Lees-ure Lite
GWRRA 339547 KY - 'G'
DS# 1547

1amp
Posts: 5
Joined: Wed May 15, 2013 9:00 pm
Location: Calgary, Alberta, Canada
Motorcycle: 1983 GL1100A Aspencade

Re: Onboard Compressor

Postby 1amp » Thu Aug 15, 2013 9:47 am

Thank you for the reply


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Brandwatch [Bot] and 3 guests