1983 Goldwing Aspencade Front Cailpers


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
BrianBonnie
Posts: 2
Joined: Mon Apr 26, 2010 11:34 am
Location: Marlette, MI
Motorcycle: 1983 GL1100A

1983 Goldwing Aspencade Front Cailpers

Postby BrianBonnie » Tue Apr 27, 2010 7:01 am



I'm rebuilding my front cailpers the right side is hooked with the rear brake piston size is about 1.00" the left side is about 1.250" is there a kit out there to rebuild both? 29-0009 kit looks to be both the same side. My thinking is the 1.250" piston is the same as the back brake and the 1.00" is a front size piston just want to order the correct seals the first time.

Thanks
Brian



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 1983 Goldwing Aspencade Front Cailpers

Postby WingAdmin » Tue Apr 27, 2010 11:28 am

That 29-0009 kit says:

Fits GL1100 Aspencade & Interstate (83).
Rebuilds both front calipers.
Made in Japan.

To me, that says it should have both sizes for the two front calipers. Have you bought the kit and they are the same? Or are you just going by the picture on the web site?

BrianBonnie
Posts: 2
Joined: Mon Apr 26, 2010 11:34 am
Location: Marlette, MI
Motorcycle: 1983 GL1100A

Re: 1983 Goldwing Aspencade Front Cailpers

Postby BrianBonnie » Tue Apr 27, 2010 12:49 pm

No haven't bought it just don't want to buy it if there both the same size. Was going by picture on the web site.

User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 1983 Goldwing Aspencade Front Cailpers

Postby WingAdmin » Tue Apr 27, 2010 8:37 pm

I have had VERY good experiences with Partsnmore - I've bought quite a bit of stuff from them, including rebuild kits for ALL of my calipers and master cylinders. If it says on their site that it's for the 83 Aspy, then I'd believe that what they send you will be the correct size.

User avatar
britman
Posts: 150
Joined: Tue Mar 09, 2010 5:58 pm
Location: saint louis
Motorcycle: 83 goldwing and an 82 naked goldwing

Re: 1983 Goldwing Aspencade Front Cailpers

Postby britman » Sun May 02, 2010 12:19 pm

go and look at partsnmore .com its where i got my brake parts from prices are good and the parts are too




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Johnyy Smoke, MSNbot Media [Bot] and 2 guests