83 Goldwing Interstate Rear Master Cylinder


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
clee1985
Posts: 3
Joined: Fri Sep 13, 2013 10:11 am
Location: Columbia, South Carolina
Motorcycle: 1983 Goldwing Interstate

83 Goldwing Interstate Rear Master Cylinder

Postby clee1985 » Mon Apr 28, 2014 8:30 pm



Hey gang,

Rebuilding my bike (Black Betty). I have hit a snag. removed the rear master cylinder due to a leak. Bought a kit from parts and more and installed, still leaking. The bore of my old m/s is not sound, therefore the seals will not work. When you pump the brakes you can hear air escaping until you get it bleed and then fluid begins to leak.

So here is the delimma. No more 83 M/S available from what i can find. So here is what i am doing. Since I can't replace with like m/s I am going to do a complete brake makeover. Doing away with the famous front rear share option and going back to the rear way a scooter should brake.

I need help with finding a m/s that will work on this bike. i need a m/s with a banjo fitting that will bolt in place and work with factory lever setup? Any help would be appreciated.

Thanks.

I'll post pics soon of the rebuild. Bike was in a pretty good condition when i got it, but i just can't leave well enough alone. It should be a beast when done.



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: 83 Goldwing Interstate Rear Master Cylinder

Postby WingAdmin » Wed Apr 30, 2014 11:51 am

Can't say for sure if it would fit without modification somewhere, but I think my first look would be a rear master cylinder from another 1100 (perhaps an 82) with unlinked brakes.

User avatar
82aspen
Posts: 122
Joined: Sun Apr 29, 2012 8:23 pm
Location: canuck eh!
Motorcycle: 82 aspencade

Re: 83 Goldwing Interstate Rear Master Cylinder

Postby 82aspen » Tue May 06, 2014 12:36 am

some folks are modding/using an 1800 pedal m/c on the 1100 line, info is on the nekked site

carl langendorf
Posts: 24
Joined: Mon May 27, 2013 5:53 pm
Location: Kenosha, Wisconsin
Motorcycle: 82 gl1100 interstate

Re: 83 Goldwing Interstate Rear Master Cylinder

Postby carl langendorf » Sat May 10, 2014 4:47 am

i have an 82 rear master cylinder that came off of my 82 gl1100 interstate that I just got cleaned out and now is an extra one. Brakes are not linked together...........




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Bing [Bot], Brandwatch [Bot], PhotoDoctor and 2 guests