throttle stcking


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
kezer
Posts: 4
Joined: Fri Dec 13, 2013 3:01 pm
Location: Columbus, North Carolina
Motorcycle: 1998 goldwing le

throttle stcking

Postby kezer » Sun May 18, 2014 6:03 pm



83 interstate. Carbs clean and rebuilt 6 months ago.Throttle cables good and throttle snaps back perfectly. When i throttle up the rpms and release the throttle it acts like the throttle is sticking and then it slowly comes back to idle. No lack of power,plugs and wires new. Nothing on the throttle is sticking on the outside of the carbs. Also carbs have been synked.



User avatar
dingdong
Posts: 2865
Joined: Thu Apr 08, 2010 8:35 am
Location: Oklahoma City
Motorcycle: 1976 gl1000
1993 gl1500
2004 NRX1800 Rune

Re: throttle stcking

Postby dingdong » Mon May 19, 2014 6:58 am

Famous last words. Carbs cleaned and rebuilt. Either your sync is off or it's possible you have one or more slides hanging up. Did you rebuild or did someone else do the work?
Tom

A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed.

User avatar
RBGERSON
Posts: 2625
Joined: Tue Mar 09, 2010 7:57 am
Location: SCOTTSDALE, AZ
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: throttle stcking

Postby RBGERSON » Mon May 19, 2014 8:04 am

+1 on sticking slides did you polish the slide tubes and did you keep the caps and bottoms together..IE did not mix them between carbs???
HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE

FAIR WINDS,
RB

User avatar
FlashBack
Posts: 115
Joined: Tue Apr 09, 2013 8:56 pm
Location: Cheshire, Oregon
Motorcycle: 1983 Honda GL1100 Interstate

Re: throttle stcking

Postby FlashBack » Thu May 22, 2014 4:37 pm

kezer wrote:83 interstate. Carbs clean and rebuilt 6 months ago.Throttle cables good and throttle snaps back perfectly. When i throttle up the rpms and release the throttle it acts like the throttle is sticking and then it slowly comes back to idle. No lack of power,plugs and wires new. Nothing on the throttle is sticking on the outside of the carbs. Also carbs have been synked.

Hows your choke?




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Yahoo Slurp [Bot] and 8 guests