I took the clutch apart and the dampener plate was in pieces. Some of the rivets missing, outer parts cracked and apart. So, I know what my clutch troubles have been.
I have the friction plates to put in but where would I get another dampener plate? Or if I can replace that with say two more steel plates, would that work and where can I get those?
Thanks for any help.
Clutch Dampener plate
-
- Sponsored Links
-
- Posts: 285
- Joined: Fri Aug 07, 2009 9:24 pm
- Location: Eliot, ME
- Motorcycle: 1983 GL1100 Interstate
- RBGERSON
- Posts: 3071
- Joined: Tue Mar 09, 2010 7:57 am
- Location: SCOTTSDALE, AZ
- Motorcycle: 98 SE GL 1500
had every year from 75 to 83
Re: Clutch Dampener plate
HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE
FAIR WINDS,
RB
NOW INTO 1500'S..RIDING A 1998 SE
FAIR WINDS,
RB
-
- Posts: 285
- Joined: Fri Aug 07, 2009 9:24 pm
- Location: Eliot, ME
- Motorcycle: 1983 GL1100 Interstate
Re: Clutch Dampener plate
So, can I use the metal plates as I described??
- spiralout
- Posts: 1201
- Joined: Sun Feb 17, 2013 6:41 pm
- Location: Alabama
- Motorcycle: 1975 GL1000 (gone)
1980 GL1100I (with '77 1000 engine)
1996 GL1500 SE
Re: Clutch Dampener plate
Yep, you can. http://www.wingovations.com/clutch-plat ... 4579471089robertdawber wrote: So, can I use the metal plates as I described??