some time carburetor 2 pull out fuel


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
loscosnk
Posts: 6
Joined: Sun Jan 16, 2011 6:35 am
Location: Italy
Motorcycle: 1981 GL1100

some time carburetor 2 pull out fuel

Postby loscosnk » Fri May 22, 2015 5:24 am



Hi all,

i have one strange issue on my GL1100, one yaers ago, rebuiled on Honda center all carburetors.

after that some time from the carburetor two, if start it on side stand lose many fuel but i can't find where fuel put out, random time lose many fuel when is on central stand.

honda center have disassemble many time carburetors block but can't find anything, tried to replaced oring, two time carb kit and have synchronized it .

at this link i have uploaded a video

https://www.dropbox.com/s/8tv051ug1noni ... o.mp4?dl=0


anyone have some idea?

i'm so sorry for bad english



User avatar
Aussie81Interstate
Posts: 679
Joined: Thu Nov 27, 2014 2:34 am
Location: Penrith Australia
Motorcycle: 1982 CX500 Turbo (restoration project)
1981 GL1100 Interstate (sold)
1988 GL1500

Re: some time carburetor 2 pull out fuel

Postby Aussie81Interstate » Fri May 22, 2015 5:54 am

Looks like a bad float bowl gasket - I doubt there is one in there. And a badly adjusted float level..

User avatar
RBGERSON
Posts: 2612
Joined: Tue Mar 09, 2010 7:57 am
Location: SCOTTSDALE, AZ
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: some time carburetor 2 pull out fuel

Postby RBGERSON » Fri May 22, 2015 8:13 am

could be bad float needle or seat; or floats set wrong; or just bad bowl gasket.
HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE

FAIR WINDS,
RB

User avatar
Johnyy Smoke
Posts: 597
Joined: Sat Nov 26, 2011 6:44 am
Location: Se Minnesota
Motorcycle: 1980 GL1100
Vetter. "Its like Deja Vu all over again".

Re: some time carburetor 2 pull out fuel

Postby Johnyy Smoke » Fri May 22, 2015 4:09 pm

I agree with RB - float set wrong or bad gasket, float set wrong would be my best guess.
The float has to be exactly right- "close enough" will not work. Regards, Johnny

loscosnk
Posts: 6
Joined: Sun Jan 16, 2011 6:35 am
Location: Italy
Motorcycle: 1981 GL1100

Re: some time carburetor 2 pull out fuel

Postby loscosnk » Tue May 26, 2015 3:41 am

Many thanks for help.

issue founded, float set wrong.

regards




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Bing [Bot] and 1 guest