Information and questions on GL1100 Goldwings (1980-1983)
- Sponsored Links
4 posts • Page 1 of 1
- Site Admin
- Posts: 17162
- Joined: Fri Oct 03, 2008 4:16 pm
- Location: Strongsville, OH
- Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer
moneypit wrote:I need to adjust the valves on Moneypit Where is a good place to buy Valve cover gaskets..
If the valves have been adjusted anytime recently, the gaskets should still be in good shape (they are reusable).
If you are in doubt, or think you will need new ones, you can get them (new) from Cyclemax. The part number is 12328-371-000 (same one for both sides), and you need two, at $15 each: https://www.onlinemicrofiche.com/cyclem ... ndaMC&a=19
- Posts: 145
- Joined: Mon Jul 07, 2014 2:43 pm
- Location: Grand Haven Mi
- Motorcycle: 1983 GL1100I Interstate
thanx W.A. I had them off in the spring to check the adjustment and they are leaking just enough to ruin my boots. Moneypit has a little tic on the left side so time for new gaskets and some adjustment..
- Posts: 222
- Joined: Fri Mar 13, 2015 7:23 am
- Location: Independence, MO
- Motorcycle: 1981 Honda Goldwing Interstate GL1100I
1985 Honda Goldwing Limited Edition gl1200
Now all you need is a ticket oak tree and you will be set
Thanks to all who answer and help. It is greatly appreciated!
Who is online
Users browsing this forum: No registered users and 2 guests