What size pitch are the screws for the carburetors. Like float bowl screws. I want to buy all new stainless steel screws for the carbs since I'm rebuilding the carbs. Going to replace all the screws. I have looked up the screw size and length but not the pitch.
thanks
allen
WHAT PITCH SCREWS FOR THE CARBURETORS
-
- Sponsored Links
-
auctioneeral
- Posts: 300
- Joined: Thu Sep 25, 2014 8:05 pm
- Location: shamong, New Jersey
- Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored
-
Overdog
- Posts: 218
- Joined: Sat Oct 12, 2013 7:00 am
- Location: Pittsburgh, Pennsylvania
- Motorcycle: 83 Goldwing Interstate
74 BMW R90/6
Re: WHAT PITCH SCREWS FOR THE CARBURETORS
I don't remember the pitch but when I had my carbs off I went to our local True Value hardware and they had a "checker" thingy next to the drawers with the screws and nuts.....you could check the nuts or screws that you had and get the numbers to cross reference them. I replaced everything with shiny new allen head screws.
-
auctioneeral
- Posts: 300
- Joined: Thu Sep 25, 2014 8:05 pm
- Location: shamong, New Jersey
- Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored
Re: WHAT PITCH SCREWS FOR THE CARBURETORS
OK Thanks
I'm going to local hardware store.
I'm going to local hardware store.
-
indianakid
- Posts: 151
- Joined: Sun Sep 26, 2010 5:28 pm
- Location: long beach, ca
- Motorcycle: 83 GL1100 I
Who is online
Users browsing this forum: No registered users and 4 guests