GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
User avatar
norseman47
Posts: 52
Joined: Wed Sep 08, 2010 7:36 pm
Location: Ulster Park, NY
Motorcycle: 1982 GL1100I

GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby norseman47 » Sat Aug 15, 2015 1:51 pm



Curious if anyone has tried this setup?

http://www.ebay.com/itm/HONDA-GOLDWING- ... 34&vxp=mtr




User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby auctioneeral » Sat Aug 15, 2015 2:49 pm

Manifold ok. Carb empi ??

User avatar
Johnyy Smoke
Posts: 599
Joined: Sat Nov 26, 2011 6:44 am
Location: Se Minnesota
Motorcycle: 1980 GL1100
Vetter. "Its like Deja Vu all over again".

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby Johnyy Smoke » Sat Aug 15, 2015 5:03 pm

Randakk's Cycle Shakk has an article, and also sells a similar set up, on these types of mods.
The reviews on these have been mixed, some say the bikes get uneven gas flow , some say to much gas, and some say not enough. :?
Do a search on this site, we have talked about it a bit. Regards, Johnny

User avatar
Randakk
Posts: 15
Joined: Fri Oct 30, 2009 11:53 am
Location: United States
Motorcycle: 1976 Honda GL1000
Contact:

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby Randakk » Fri Aug 28, 2015 1:09 pm

Johnyy Smoke wrote:Randakk's Cycle Shakk has an article, and also sells a similar set up, on these types of mods.
The reviews on these have been mixed, some say the bikes get uneven gas flow , some say to much gas, and some say not enough. :?
Do a search on this site, we have talked about it a bit. Regards, Johnny


Thanks for the mention, but I have never sold single carb set-ups (other than a few personal legacy items on EBAY from my collection of oddities).

Commercially, I do offer a manifold setup for a pair of outboard Weber IDF40 carbs. See: http://randakks.com/products/randakks-i ... -or-gl1100

Thanks
Randall Washington (Randakk)
Founder & Chief Executive Rider
Pinehurst, NC USA
http://www.randakks.com/

dar1971
Posts: 2
Joined: Thu Mar 31, 2016 12:24 pm
Location: Illnois
Motorcycle: GL1100

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby dar1971 » Thu Mar 31, 2016 12:28 pm

Hi, I do have one of these set-up's on my GL1100. Runs very well.
I bought it on Bonanza, but they are everywhere. Very good quality.

dar1971
Posts: 2
Joined: Thu Mar 31, 2016 12:24 pm
Location: Illnois
Motorcycle: GL1100

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby dar1971 » Thu Mar 31, 2016 12:30 pm

I purchased here if anybody interested.
http://www.bonanza.com/listings/Single- ... /313357692

User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: GOLDWING-GL1000-1100-SINGLE-CARBURETOR-MANIFOLD

Postby auctioneeral » Thu Mar 31, 2016 2:43 pm

You can pick up new single carb manifold on ebay $130. and new empi 34-3pitc carb on amazon for around $95.




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 2 guests