CARBURETOR QUESTION ON FUEL


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

CARBURETOR QUESTION ON FUEL

Postby auctioneeral » Mon Sep 14, 2015 10:33 am



Just cleaned and check and replaced all Orings and gaskets. Adjusted floats to 15.5MM. Now sitting on bench and had NO fuel leaks. And I sync throttle butterflys.
Now sitting on bench and give it throttle I have fuel squirting out of 3 and 4. But no fuel squirting out 1 and 2. What do I check to see what problem is.. I did install new accelerator pump.
I just check the fuel in the bowls and all are the same when opening drain screw and fuel running in to jar.



User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: CARBURETOR QUESTION ON FUEL

Postby auctioneeral » Tue Sep 15, 2015 8:23 pm

Don't worry I got my problem fix. Thank You Very Much

User avatar
WingAdmin
Site Admin
Posts: 17047
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: CARBURETOR QUESTION ON FUEL

Postby WingAdmin » Wed Sep 16, 2015 10:26 am

Good to hear you fixed the issue. What was the problem?

User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: CARBURETOR QUESTION ON FUEL

Postby auctioneeral » Wed Sep 16, 2015 10:32 am

Clog nozzles on 1 and 2 carbs

User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: CARBURETOR QUESTION ON FUEL

Postby auctioneeral » Fri Sep 25, 2015 3:48 pm

After many months working on bike I got it running good now. Had a proble with running rich, but took care of problem today by installing brand new slow idle jets.

indianakid
Posts: 126
Joined: Sun Sep 26, 2010 5:28 pm
Location: long beach, ca
Motorcycle: 83 GL1100 I

Re: CARBURETOR QUESTION ON FUEL

Postby indianakid » Sat Sep 26, 2015 12:24 am

what size jets did you install and where did you purchase them?

User avatar
auctioneeral
Posts: 300
Joined: Thu Sep 25, 2014 8:05 pm
Location: shamong, New Jersey
Motorcycle: 1981 GL1100 nake
1981 GL1100 full dresser
Both getting restored

Re: CARBURETOR QUESTION ON FUEL

Postby auctioneeral » Sat Sep 26, 2015 6:04 am

#35 slow idle jets. They fit great.




Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: cowboy450, MaxPointCrawler [Bot], sw3dl1 and 2 guests