Saddlebag Weather Seal Replacement?


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
rkmason
Posts: 67
Joined: Tue May 13, 2014 10:30 am
Location: Austin, TX
Motorcycle: 1981 GL1100 Interstate

Saddlebag Weather Seal Replacement?

Postby rkmason » Mon Feb 15, 2016 11:32 am



Has anyone found replacements for the rubber saddlebag weather seals around the top edge of the saddlebag box, either the OEM type or something else that would work without too much modification? So far I can't find the Honda OEM parts anywhere, and I have not yet identified any other weather seal material that would work as a substitute.



User avatar
urbanmadness
Posts: 214
Joined: Sat Feb 15, 2014 3:31 pm
Location: Sacramento, California
Motorcycle: 1982 Gl1100A Aspencade *sold
1989 GL1500 Aspencade

Re: Saddlebag Weather Seal Replacement?

Postby urbanmadness » Tue Feb 16, 2016 11:20 am

I need to replace some too. I'm looking into using Helmet Beading...

rkmason
Posts: 67
Joined: Tue May 13, 2014 10:30 am
Location: Austin, TX
Motorcycle: 1981 GL1100 Interstate

Re: Saddlebag Weather Seal Replacement?

Postby rkmason » Tue Feb 16, 2016 11:57 am

urbanmadness wrote:I need to replace some too. I'm looking into using Helmet Beading...


Is that the black plastic material I see going around the edge of the fiberglass shell of my helmet?

jhill9365
Posts: 7
Joined: Sun Jan 10, 2016 6:10 pm
Location: Overland Park, Ks
Motorcycle: 1982 GL1100A Aspencade

Re: Saddlebag Weather Seal Replacement?

Postby jhill9365 » Tue Feb 16, 2016 12:46 pm

This is what I used. Found it it on e-bay, then used a small amount of gorilla glue to seal it in place.
1-4-X-1-8-Black-Soft-U-Channel-Rubber-Edge-Trim-Seal-Strip-Weatherstrip

User avatar
blackomen
Posts: 34
Joined: Sun Jun 05, 2011 10:40 pm
Location: Hartford, MI
Motorcycle: 1983 Gl1100 Interstate

Re: Saddlebag Weather Seal Replacement?

Postby blackomen » Tue Feb 16, 2016 1:15 pm

To eBay! Yeah I need some, too. :D Thanks for the tip!
Lucy Lou
1983 Gl1100I

User avatar
RBGERSON
Posts: 2625
Joined: Tue Mar 09, 2010 7:57 am
Location: SCOTTSDALE, AZ
Motorcycle: 98 SE GL 1500
had every year from 75 to 83

Re: Saddlebag Weather Seal Replacement?

Postby RBGERSON » Wed Feb 17, 2016 6:53 am

rubber tubing split down the middle..find a size you like cut to lenght and split it..glue in place..also various car and car door weather sealer work.. You want something soft that will give under a little pressure.


HAD LOTS OF GOLDWING 75-83
NOW INTO 1500'S..RIDING A 1998 SE

FAIR WINDS,
RB


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest