Overheating


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Goldwing1983
Posts: 2
Joined: Sun Jun 12, 2016 2:01 pm
Location: Lexington Indiana
Motorcycle: 1983honda goldwing interstate

Overheating

Postby Goldwing1983 » Sun Jun 12, 2016 2:07 pm



I was try to find my fan relay switch I thought it was on the thermostat housing but my 1983 Honda goldwing interstate don't have one there where would it be at



User avatar
702scottc
Posts: 252
Joined: Tue May 15, 2012 12:12 am
Location: Las Vegas, Nevada
Motorcycle: 1980 GL1100 Interstate (sold)
1990 GL1500 Aspencade (sold)
2005 GL1800

Re: Overheating

Postby 702scottc » Tue Jun 14, 2016 8:36 pm

It's the 2 wire switch in the lower right side of the water manifold, below the thermostat. The single wire switch is for the temperature gauge. You can pull the connector from the the switch and jumper the connectors to verify that the fan is working. I had an issue with my 1980, the push on connectors on the plug where not making a good connection. Those bullet style wire connectors get loose. I actually removed the switch and soldered wires to each terminal and connected it that way, never had another issue.


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest