Head Gasket replacement 1983 GL1100 interstate

Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
Posts: 2
Joined: Fri Aug 14, 2009 8:59 pm
Location: Camden Point, Missouri
Motorcycle: 1983 GL1100I Interstate

Head Gasket replacement 1983 GL1100 interstate

Post by joeandjo68 » Fri Aug 14, 2009 9:25 pm

What is involved in replacing head gaskets on a 1983 GL100 Interstate?

User avatar
Posts: 15
Joined: Wed Jul 22, 2009 1:07 pm
Location: Gahanna, Ohio
Motorcycle: 82 GL 1100 Interstate

78 GL 1000

Re: Head Gasket replacement 1983 GL1100 interstate

Post by Oldewing » Sun Aug 16, 2009 7:53 am

Lower fairing, both sides radiator, crash bars, timing belt covers, carbs(just lift them up and strap to frame), airbox, exshauts pipes, valve covers, timing belts, Then head bolts, along with the little one underneath....

Clean head surface, lap valves if you wish, along with new stem seals and put all back where you found it.

Not as bad as it reads........Pics and full rundown over at Nakedgoldwings.com
you can go exactly .4 miles with the petcock turned off.

82 GL1100
68 CB350
06 GL1800

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 6 guests