CLUTCH CABLE


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
sonnyboy
Posts: 14
Joined: Wed Jul 15, 2009 7:51 am
Location: United States

CLUTCH CABLE

Postby sonnyboy » Mon Aug 17, 2009 8:31 am



MY FRIEND HAS AN 81 GWI AND HAS BORKEN TWO CABLES IN ABOUT 3 MONTHS. THE FIRST MAY HAVE BEEN ORIGANAL, NOT SURE, THE SECOND WAS FROM MOTION PRO. THE "BALL" PULLED FROM THE SECOND, THE FIRST JUST BROKE. WE DID INSTALL HD CLUTCH SPRINGS LAST YEAR. ANY COMMENTS, SUGGESTIONS ?



User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: CLUTCH CABLE

Postby WingAdmin » Mon Aug 24, 2009 12:26 pm

Certainly possible that the springs are a bit much, but if the original cable was in fact original, it could have just met the end of its service life - and the second cable could have just been bad.

It's not that big a deal to change the clutch cable, I would go ahead and put another one in there and see if third time's the charm. Don't forget to lube the cable.


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest