Compatible rear master cylinder push rods


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
PuppyWing
Posts: 18
Joined: Sat Nov 04, 2017 9:02 pm
Location: Sun City, AZ.
Motorcycle: 1983 GL1100A Aspencade

Compatible rear master cylinder push rods

Post by PuppyWing » Sun Mar 04, 2018 11:55 pm



Hi everyone. The rear master cylinder push rods on my 83 Aspencade is pitted and I'm not sure how bad the pitting has to be before it becomes a hazard. But just to be safe I'm interested in getting a new one. I've seen some on eBay for other Hondas that look like they will work but Im not having any luck finding one for the gl1100. Any suggestions?



DaveO430
Posts: 694
Joined: Fri Jan 02, 2015 7:28 pm
Location: Amity. Ar
Motorcycle: 2010 GL1800
2004 Suzuki DR200

Re: Compatible rear master cylinder push rods

Post by DaveO430 » Mon Mar 05, 2018 7:18 am

It would have to be some pretty serious pitting to make it dangerous. All I can suggest is make sure you get a longer one you can cut and thread to the proper length.

PuppyWing
Posts: 18
Joined: Sat Nov 04, 2017 9:02 pm
Location: Sun City, AZ.
Motorcycle: 1983 GL1100A Aspencade

Re: Compatible rear master cylinder push rods

Post by PuppyWing » Thu Mar 08, 2018 7:22 pm

Here's the pushrod. What do you think?
Attachments



User avatar
Hoosier Jack
Posts: 393
Joined: Thu Oct 02, 2014 4:21 am
Location: Terre Haute, IN
Motorcycle: 1982 GL1100 Interstate

Re: Compatible rear master cylinder push rods

Post by Hoosier Jack » Fri Mar 09, 2018 10:48 pm

I would take a wire wheel and clean it up real good. I think it will be ok.

PuppyWing
Posts: 18
Joined: Sat Nov 04, 2017 9:02 pm
Location: Sun City, AZ.
Motorcycle: 1983 GL1100A Aspencade

Re: Compatible rear master cylinder push rods

Post by PuppyWing » Sat Mar 10, 2018 1:00 am

Sure but what's underneath the pitting? How far down does it go?



Post Reply