New to board


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
Paul_Oregon
Posts: 2
Joined: Wed Apr 04, 2018 3:44 pm
Location: Ontario, Oregon
Motorcycle: 1981 GL1100 Standard

New to board

Post by Paul_Oregon » Wed Apr 04, 2018 3:53 pm



Hey everyone!

I just registered and thought I'd introduce myself. My son and I are working to restore a 1981 GL1100 so I KNOW I will have a lot of questions along the way. Mechanically the bike is in good condition but it's a bit of a mess cosmetically. It came with a Vetter fairing and bags which we have removed. We're now working to get the headlight and front turn signals set up so it will be street-legal. Then the long job of clean-up begins. We also purchased a seat cover that we hope will return the seat to looking as close to stock as possible. Below is a "before" picture.






Aussie81Interstate
Posts: 943
Joined: Thu Nov 27, 2014 2:34 am
Location: Penrith Australia
Motorcycle: 2001 GL1500F6C Valkyrie
1982 CX500 Turbo (restoration project)
1981 GL1100 Interstate (sold)
1988 GL1500 (sold)

Re: New to board

Post by Aussie81Interstate » Wed Apr 04, 2018 4:45 pm

The bike looks pretty good as per the picture.

Have fun making it all pretty again - but don't forget to ride it :)

User avatar
eklimek
Posts: 356
Joined: Tue Feb 15, 2011 1:55 pm
Location: St Catharines Ontario Canada
Motorcycle: 81, 82, 83GL1100 in stasis, CB350f x many, (CB400f x2 -sold cb550 -sold) 2012 cbr250 gymkhana, 2017 cb500x daily driver

Re: New to board

Post by eklimek » Wed Apr 04, 2018 7:29 pm

Welcome.

I also removed the Vetter front from an 83.

Leave the rear bags and frame. They will come in handy. With bags removed it looks near normal.

The 81 has a relatively high rpm in topgear as it was built for the 55 mph speed limits. The sweet spot is near 60 mph. The most likely problems you may encounter are well discussed on this site.

Post Reply