gl1100 aspencade primary drive


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
kawasaki0161
Posts: 1
Joined: Sat Jan 01, 2011 4:07 pm
Location: United Kingdom
Motorcycle: honda gl1100 aspencade A 1982

gl1100 aspencade primary drive

Postby kawasaki0161 » Sun Jan 02, 2011 4:37 pm



to all members out there who can help me
i am a new member and this is my 1st posting and i hope that i can help other members one day,however my problem is this, once my aspencade engine is started up there is a knocking/slaping sound from the back of the engine, i am thinking that it is the primary drive chain and if so is there any way of adjusting it without stripping the engine down as i notice from the spares manual that there is a chain tensioner fitted, also if this is not possible will it do any harm running with a slack chain,
many thanks to all
r dickinson



goldtr6c
Posts: 147
Joined: Tue May 11, 2010 11:17 am
Location: Hitchcock, Tx
Motorcycle: 1985 GL1200 LTD
1982 GL1100 STD
1976 GL1000 "800lb Canary"

Re: gl1100 aspencade primary drive

Postby goldtr6c » Sun Jan 02, 2011 7:26 pm

The peimary drive may be slapping because the carbs are out if sync. To tighten or replace thetensioner will probably call for dropping the engine. The noise could also be the bolt on the alternator coming loose. This can be accessed from the back by unscrewing the inspection plug on back of the housing. This plug looks just like the level plug on your final drive.









II

User avatar
WingAdmin
Site Admin
Posts: 17046
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: gl1100 aspencade primary drive

Postby WingAdmin » Sun Jan 02, 2011 9:16 pm

Are you hearing this noise at idle, or when accelerating at low RPM?


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: No registered users and 1 guest