Wiring harness

Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
Post Reply
User avatar
Posts: 10
Joined: Sun Apr 03, 2011 7:24 am
Location: Casco Maine, USA
Motorcycle: 1982 GL1100 standard

Wiring harness

Post by really2bald » Mon Apr 04, 2011 5:47 pm

I was wondering if there are replacement wiring harnesses available for 1982 GL 1100's. I figure I will be everywhere on this thing so where as I am encountering more and more electrical gumps and problems on this old gal I figured I would ask. Besides if there is a source it could save me a but load of soldering and shrink tubing. And i hate soldering and shrink tubing.
I will also be looking to replace the valve seals can I get these anyplace other than a Honda dealer?

Thanks for the help every one.

User avatar
Site Admin
Posts: 18848
Joined: Fri Oct 03, 2008 4:16 pm
Location: Strongsville, OH
Motorcycle: 2000 GL1500 SE
1982 GL1100A Aspencade (sold)
1989 PC800 (wife's!)
1998 XV250 Virago (sold)
2007 Aspen Sentry Trailer

Re: Wiring harness

Post by WingAdmin » Tue Apr 05, 2011 8:37 am

I haven't seen a new replacement harness (other than a dealer item, and those are pretty well nonexistent now). I do know of a place called Electrical Connection that sells all the original connectors used on the harnesses, so that would be a step in the right direction.

I've seen valve seals online from many places, and you'll find them cheaper than at any dealer. Try Cyclemax.

Post Reply