i983 lcd display


Information and questions on GL1100 Goldwings (1980-1983)
  • Sponsored Links
User avatar
lovig214
Posts: 27
Joined: Mon Apr 26, 2010 6:29 pm
Location: Clemons, Iowa
Motorcycle: 1983 gl1100 goldwing

i983 lcd display

Postby lovig214 » Sun May 22, 2011 10:52 am



Hi folks
I have a 1983 gl1100 Interstate. It has the three cluster lcd display( radio,volt, temp and cb) The radio and the cb displays work but not the volt and temp. It started out intermittent and then some odd letters and then over about a month or so it quite altogether. I have check for juice at the back of the display and it has juice. Any thoughts and if I need to replace it does anyone know where to buy one.

Thanks Craig



rartmayer
Posts: 7
Joined: Wed Jul 29, 2009 12:23 pm
Location: Harrison, Ohio

Re: i983 lcd display

Postby rartmayer » Fri May 27, 2011 6:23 am

I had a very similar situation when I bought my 83 Aspencade. I took the display out of the fairing and found that mice had been living there for some time. They had eaten through five of the conductors in the harness for the displays. Perhaps some rodents have done the same to yours? The damage was repairable, with some solder, heat shrink, and same-guage wire.


Return to “GL1100 Information & Questions”




Who is online

Users browsing this forum: Bing [Bot], Johnyy Smoke, MSNbot Media [Bot] and 1 guest